I can not get my treo to sync with bluetooth on the mercedes s550. Any help?
Check your car's head unit manual or ask your car dealer if the treo is compatible.
I have found the the Treo has trouble connecting to bluetooth devices while it's in its screen off state or has the key lock on. Try powering it on when you get into your car to see if that makes a difference.
The speed dials are a pain as mine in my audi or wifes bmw picks up the speed dials. But nothing else, however can recieve all calls.
Related
I have bought a Plantronics M3000 bluetooth headset for my QTEK 2020. I have no problems pairing, calling and answering. However the headset just shuts off after a few minutes of conversation. It doesn't just cut the conversation but shuts off. I can make multiple short calls but nothing longer than 3/4 minutes. It works, however, without problems on my wife's Ericsson T68. Anyone can help ? Thanks.
Marek
Hello,
I have the MDA2 (same as QTek2020) and a Plantronics M3000 and It's been working just fine.
The problem you describe it's very weird since you mentioned that the headset works fine with your wife's mobile, and that makes me think that your QTek has some sort of problem with the Bluetooth stack or hardware.
It may be well worth to try (if possible) another headset just to make sure that is not the M3000 fault.
Do you see any type of error or message on the screen at the time of disconnection?
Does it always cut the conversation at the exact same moment?
Does the problem match the time the QTek takes to power save?
Any other clues?
Thanks.
I did not have the occasion to test another BT headset on the Qtek. When it shuts down there isn't any message displayed.
I have no problems with the BT stack (with the Pocket Bluetooth Tools patch) when using it with a BT GPS (Emtac) receiver, it works for hours.
However, your suggestion that it might happen when the Qtek goes in energy saving mode is interesting. I will check that tomorrow.
I'll post the result.
Hi
I seem to have a similar poblem after installing pocket bluetooth tools!.
I use a Jabra BT 250..and I noticed that the headset just mutes during the call..
I am generally used to switching off the display of the XDA after placing the call to power save ...
So I discovered that the headset would mute whenever i switch off the xda after making the call (which it never did prior to installing PBT)!
any thoughts on that?
maybe it has to do with the auto switch off plugin?
Actually I just experienced that too...
If I place (or answer a call) the next time I try to use the phone via the BT headset I notice the BT headset was turned off... Yeah, it could be related to the Powersave feature on the today plugin that PBT installs as a plugin... :roll:
Need to investigate...
Best regards,
Rayan
Both my bt headsets have stopped working since installing pocket bluetooth tools latest version, I have reverted back to version 1005 and everything is fine. I have a sony-ericsson EBH-65 and a skypower clip on headset.
my platronics does the same also its annoying you cant even transfer the call back to the device you have to hand up turn off bt and then turn it abck on and headset mode back on it also does the same on my pc
when im on msn using it as a headset it just d/c and i have to turn it off and turn it back on again
dont see what the problem is
btw the range on the xda2 and platronics is amazing i had it on my bedrooms desk and i went outside it passed through the living room wall and the patio window and i was stood 5m down my garden im sure it would of been over 10m and it was still working if i kept still when i moved it went crackly but ah well lol
just hope someone sorts the prob out
Hi,
I was having the same problem with the M3000. I just had confirmation from Plantronics that this problem is a bug in the product that occurs with the XDA II. I am currently in the process of returning the product.
Regards...Mike
Same problem M3000 doesn't work. Give up now before too much frustration makes you feel ill.
Try the Hello 2 headset. Work with my Aussie XDA2 and is very small and lightweight. Even had a neck chain to carry it around like a USB drive.
Just letting people know that the Parrot CK3000 car kit works great with my XDA2. It only uses "headset" mode, so functionality is limited, but it routes the calls through the car speakers and mutes the stereo, so that's all you can really ask.
On my Alfa, I couldn't use the standard ISO connectors, as the car has a separate amplifier in the boot, but chopping the ISO connectors off and connecting the wires separately to the "telephone in" connectors on the back of the radio worked just fine. I can even adjust the volume of the phone call via the steering wheel audio controls!
There's a reassuring "beep" when I turn on the ignition to let youknow tha the devices have bonded and every few days, something goes skewey on the PDA and I have to do a soft-reset to make the bluetooth bond work again, but otherwise, it works fine.
I've put an icon on my PDA for the warm-reset, so that I can do it easily in the car if I realise that it hasn't bonded automatically.
The only real glitch I've found is that if you get to your destination whilst still on the phone, I can't find any way to transfer the call back to the handset without terminating the call - any help on that would be gratefully appreciated.
Good to hear it works, I have a CK3300 with the BT GPS Functionality on route for review.
In asnwer to your question, to hand over the BT headset call to the phone just tap the 'Headphone' Icon on the status bar of the XDA.
Darren,
Funnily enough, I was just outside in the car experimenting when you replied.
Sure enough, if you tap the headphone icon on the PDA, the call is successfully transferred back to the PDA and you can carry on the call directly on the PDA.
If you then press the green button on the car kit, the call will also transfer back to the car kit again.
But - Here's my last issue - If you get into the car with a call already in progress on the PDA and then turn on the car ignition, the car kit beeps to confirm that it has bonded, but I can't find any way to actually transfer the open call to the car kit....
Finally - I've come to the XDA forum for a break from Pocketgps.co.uk! I usually spend my evenings on your site. Tonight, for the first time in weeks, I thought that I'd go and seek other company. Who should be the first to reply to my post here but you!
You're going to tell me now that you also drive an Alfa and that you too frequent the alfaowner.com site as well aren't you!!!
Cheers Darren.
Ah well you see we obviously share a passion for gadgets but not Alfa's, current car is an X-Type shortly to be replaced by a Discovery and yes I spend time at both of their owners ites as well (Note to self, need to get out more!).
I think I'm correct in saying that you can't hand over an active call to a BT Handsfree be it headset or car-kit, I suspect this is a limitation of the XDA's BT Stack (thanks Microsoft NOT!)
I shall leave you in peace now, you've probably had enough of my ramblings back at home base ;')
Is this the same kit: http://www.expansys.com/product.asp?code=PAR_CK3000
There is also an upgrade http://www.expansys.com/product.asp?code=FLS-KIT but it doesn't say what you get for your £45.
Any ideas?
alfiejts said:
But - Here's my last issue - If you get into the car with a call already in progress on the PDA and then turn on the car ignition, the car kit beeps to confirm that it has bonded, but I can't find any way to actually transfer the open call to the car kit....
Click to expand...
Click to collapse
Hit the green button on the carkit, that should do it.
If not, install the XDA2 Bluetooth tool, and retry...
Nope - Green button is documented as being the way to do this for most phones, but it doesn't work with my XDA2....
I did try to install Bluetooth tools ut then couldn't get the devide to pair with the Parrott at all, so I hastily removed them.....
I'll think that I'll live with as it is, now that everything else is stable and works OK....
Hi,
I have a 8525 HTC TyTn pda phone and having so many isssues pairing it with my 2007 Land Rover Range Rover sport. I turn on the bluetooth in the 8525 and then start the car 70% of the time the car says no phone attached. Its not the car problem cause I have tried it with 5-7 other landrover/rangerovers at the dealer.
If I reset the phone multiple times then finally it pairs with the car and works fine...I don't have the problem of getting disconnected once it has been connected like some other users I have seen the post.
Is there a firmware or software I can drop on the 8525 in order tro enhance / fix the blue tooth issue?
Please help all my work emails is on my 8525 and can't afford loosing the phone as no other phone has all features of the 8525...
please help
Thanks
My AT&T Tilt works with my 2007 Range Rover Sport perfectly, the only problem I am having is syncing the contacts onto my Range Rover. Are you able to sync your contact onto your Range Rover when it pair up?
What can you do with the Bluetooth on WP7?
I cant connect my tmobile HD7 to my BMW e46
Nor can I connect my HD7 to my Sony Vaio Laptop.
Has anyone connected their WP7 to a BMW e46 or to their laptop?
What can you connect it to?
--------------------------------------------------------------------------------------------------------------
I have had many phones over the years, including a lot of the old Windows Mobile phones successfully connect and work with my car. But I cant get my new HD7 to work with my car.
I enter the pass code, then the car beeps, and on the Nav screen the message "Paired Successfully" but then it disconnects almost immediately. When i turn the car on it shows my address book and the phone stays connected but I cant get the sound to go over the cars speakers nor does the cars mic work. I can dial with the car but it goes through the phone (meaning I have to put the phone up to my ear, and use it like a regular phone). Anyone have a solution.
my focus s connects fine with my jabra sp700, well, media at least, i have not had a chance to check phone though.
I m having issue of my Focus's BT not working. Whenever i turn on the BT is goes into searching mode and doesn't come out of that.
anybody facing the same issue?
mine is OS version: 7.10.7720.68
Not exactly, but in my opinion WP's Bluetooth software is just horrible.
It has two options - on and off. You can't change your phones BT name, you can't be invisible with bluetooh on, you can't transfer files. My sister can't sync her WP with her car, whereas I (on Android) just turn BT on and it syncs instantly.
I hoped Mango would fix that, but it didn't. It's just crap.
bluetooth isn't the best part of wp7 for sure...but it sync easy with an headset or a car stereo...
reading some threads about it i found that samsung devices have the worst wp7 BT hadware...
still, i'm alright to say that files transfers should be enabled
hmmm....my focus synced with my car stereo once....but recently it has started go into "Searching" mode and doesnt sync with car stereo
I only use Bluetooth in my cars and all my previous phones worked perfectly (iPhone, iPhone3G, iPhone4, Lg Quantum, Samsung Focus).
The HTC Titan on the other hand sucks. My two vehicles handle things different.
The Challenger (factory BT) will hold onto the call even if the car is off and the door open. The call will switch back to my old phones when out of range (basically in the house) or i manually shut off bluetooth.
The Jeep (aftermarket radio) once you open the door with the car off the call goes back to the phone.
The Titan has a problem were 1/2 of the time when the call is transferred back to the phone either manually, because the car turned off, or im out of range. The mic will not engage. I can hear the person but they cannot hear me.
Haven't had a problem with my Trophy... previous car was a Lexus IS220d and it synced and worked fine.
Currently driving a Jeep Wrangler and only once I've had the "searching for device" issue.
Bluetooth on Wp7 is quite poor. You can not select, which service an adapter shall support (handsfree and A2DP). It always use both services.
Windows Phone's Bluetooth support is abysmal, but you know what's worse: Samsung's support for Bluetooth on Windows Phone. Their last firmware update for the AT&T-branded Samsung Focus reduced out-of-call Bluetooth volume so that it's way too soft and text-to-speech is impossible to use because you can't hear it. If you turn up your Bluetooth headset or car volume to compensate, then in-call volume is way too loud. There is no fix or solution, except to restore the old firmware through Zune's backup. I've been running 2103.11.3.3 instead of 2103.11.8.1 for about 5 months now. I couldn't be more furious about Samsung and AT&T's lack of urgency to fix, or even acknowledge this. I'd even deal with the disappearing keyboard (as I have anyway) if it means keeping Bluetooth working. Regardless, after this experience I will never buy a Samsung phone again.
WP7 lacks rSAP, and for many of us with European cars are SOL. Wish Microsoft would listen as many of us have complained about needing rSAP.