Disable dialing tone - (volume too loud) - RegHack?? - Palm Treo 750

I've got the second Treo 750v after I sold the first one 2 months ago and was hoping that maybe the following bug will be fixed or that my 1st unit only had this failure, but unfortunately there is the same problem with my 2nd unit:
When I start dialing a contact or a entered number -the phone application starts to dial- and if the phone volume is set to the middle level or even higher, the dialing tone is extremely loud. It is impossible to hold the Treo closed to the ear, so I must to decrease the volume.
This appears everytime when the Treo was set to higher volume even during the last call and I'm wondering whether there is any registry-hack how to decrease the overall dialing tone??

Hello fre00,
I noticed the same. If the volume is leveled to middle position the dialing tone turns incredible loud. It sounds like something oscillates in its resonance frequency. If the phone volume set set to a higher level, the sound turns quite (instead of raising up).
I bought a Treo750v from vodafone last week. The returned the first one. The second they sent me shows the same problem. I'm going send it back also. I'm curious, if the third one will have the same issue...

Related

MDA Vario sometimes not ringing with WM 6

I have just one issue after switching to Windows Mobile 6 (at first "Faria real thing", now "Crossbow Reloaded"). Sometimes the phone behaves as if the sound was switched off.
I read various discussions about which radio ROM is better etc. for not missing calls, but I guess it is not that problem. The call gets through (so I guess radio rom is ok). When having the phone in such state, I checked it by calling from the fixed phone on my desk - the call got through, there was message on the display that somebody is calling (just the ring was silent).
Once in such situation I tried to switch on/off the phone application - no change. The one thing which seems to cure it reliably is to go to the phone settings (I usually try the ringing tone I use - it works ok - and press ok). Afterwards it is normal (the phone rings).
I have not found yet any pattern when this happens... Is it possible that the phone somehow loses setting (about the set ringing tone, or about volume) and it is fixed by going to phone settings?
Has anybody else such experiences?
Othewise I am happy with WM 6 (especially I like "Internet Sharing", quicker booting and the fact that when running "Opera Mini" in "Midlet Manager" it no longer ignores hardware soft keys). Just this think is a bit of nuisance.
Mirek
I've seen this a few times myself, and yes, just playing your ringtone via the Phone Settings will fix this issue. I can say that I haven't seen this issue in some time, and thats since I stopped using the press & Hold of the CommManager button (upper left side of the phone) to switch my phone in and out of Vibrate mode. I used to use that to do a quick switch and it seemed sometimes after coming back out of vibrate mode, this issue would happen (not always, but a few times). I've now quit using that button that way and I don't think I've had the non-ring issue since.
Thanks you for the information, I will try it. It may have been the problem with that button - I mapped there task manager which I use often and pressed it sometimes a bit longer...
Mirek

My Touch pro sound keeps on getting muted

Hello, my Touch pro sound keeps on getting muted by itself, i turn the volume up, it goes up but still there's no sound, every single fucntion loses it's sound, meaning the whole system gets muted, it comes back when i restart the phone!! can anyone help??
The idiots who designed TouchPro (it really is brain dead) put the mute button on the touch screen exactly where my cheek bone can hit it when I put my Fuze up to my ear. Consequently, I frequently mute the call accidentally and only realize what has happened when the person I am calling says, "Hello? Hello?" Very annoying.

[RESOLVED][KINDOF][ICS] Black screen during a call

I wanted to ride the ICS wave but after experimenting with multiple radios/ROMs/hboots/kernels configurations I always got the same issue - while in call my screen gets black and no button will wake it up unless the call is interrupted (by the other side). Haven't found a real solution but created a workaround that actually works pretty well for me and decided to share it with whoever is in the same boat.
APK and sources attached.
I created a simple service that kick in during an active call. If activated tricks the phone into thinking that there are headphones plugged in and the screen is being turned on. While in this more the audio is being redirected to the headphone jack so you don't hear anything through the earpiece but normally I need the screen on only when I want to hang up and either way don't hear anything. Basically works perfectly well for my needs.
After installation enable and configure the service via the simple form. Once done when you get the black screen push the Vol Down multiple times to get the the lowest value and the service will unlock your screen. To get back the audio through the earpiece (and lock your screen) press Vol Up as many times as necessary to get to the max volume.
so is it one or the other?
!!senseless sensation!!

[Q] Notification Sound Issue

Hello everyone. After recently being dropped by Sprint for roaming (not intentional; coverage in my house is terrible since the tower upgrades) we decided to switch to Verizon. As a result, we chose to get a couple Galaxy S IIIs on my family plan. Both myself and my brother both have one. Mine doesn't display this problem, but his does. When he goes to turn the volume all of the way down, it turns down the system and the ringtone volume, but the notification volume stays the same. He has to manually press the little cog button to drop down the extended sound options to trigger it. Mine doesn't have this happen at all. Mine automatically mutes all of the sounds when I turn the volume all of the way down. I am sure it is a setting that we are both overlooking, but I was wondering if anyone has had this issue and knows of the problem.
Thanks for reading

ringtone volume setting itself back to LOUD

I'm so frustrated. I lower the ringtone volume on my phone to a normal, human level. I don't mess with it. Then inevitably my phone rings and the volume is somehow back to super ridiculously freaking loud. What is changing my volumes? I've tried different things to see if I can trigger the change but it seems to happen by itself with no apparent trigger. Am I the only one with this issue? I'm pretty close to building Tasker profiles to put a bandaid on it, but it would be great to know the root cause.
Maybe you have this enabled in dialer settings?
Thanks for your reply. I was really hoping that would be it but strangely I don't even have that setting. I'm on MHA-L29C567B138
UPDATE: This setting cannot be found in the normal phone settings. Searching for "pocket" there returns no results. It's only accessible through the phone dialer, and the 3-dot menu that appears there. When I finally found it, I found it was set to "ON" so I turned it off. We'll see what happens.
gm007 said:
Maybe you have this enabled in dialer settings?
Click to expand...
Click to collapse
Thanks! It got to the point where I just left the thing on vibrate! I've turned this setting off, I'm going to give it a spin tomorrow and hopefully it's successful! Man this things LOUD!??
So after finding and disabling pocket mode, I set my ring volume low. I booted to recovery to clear the cache partition for good measure. Restarted. Volume still low. Charged my phone, had it next to me while sleeping, had it in my pocket, brought it to my desk, and checked the volume. Still low. Fixed? So I thought... Then 2 minutes later it rang LOUD and scared the crap out of me. I literally just checked the volume and it was low, but when the call came in it set itself all the way up. WT actual F?
So then I ran some more tests.
1. I set the ring volume to the lowest before the bottom volume, and turned off he phone screen. Then I called myself from my land line. The call came in with the volume up at about 80%.
I hung up, turned it back down.
2. this time I didn't turn the screen off. Just left it sitting there immediately after lowering the volume. Called the phone and it rang again at about 80% volume.
I FIXED IT!
Turns out when I got the phone and google moved my apps over from my old phone I moved over "Profile Widget", which I used to use in combination with Tasker on my old rooted Note 3 to manage my volumes. I never opened Profile Widget or had it on my desktop, but it was installed because it came along for the ride when google restored my apps from my account. I uninstalled Profile Widget entirely, and now my ringtone volume is respected.
I hope this helps someone else. If it's not "Profile Widget", try opening the "phone manager" app, click on "permissions" , click on "phone", and see what is listed and enabled there. That's how I tracked down what it could be on my device.
I found the solution,the ringtone volume keeps resetting itself to load because the pocketmode is switched on, so basically the concept of pocket mode is the volume goes up anytime the phone is in your pocket or is covered by something so that you don't miss you call.
To turn it off, open the dialer, go to settings, find pocket mode and toggle it off.
To find the dialer just search it in the search bar, the click on the three dots at the bottom of the screen to access the settings.
Thank You.
what is the minimum of the sound ..i cannot put less then 25% in volume setings..but this is same to loud for me
pocekt mode is off ...
Ringtone Volume
Hi there, i wanna know how to increase my ringtone
Volume it is lowest than normal phones .
Please help me ....
My device model micromax bolt q338 and it is rooted . Help me plz

Categories

Resources