Hi,
I want to konw how to set up a "My Schedules" with Smart ToolKit that would enable the bluetooth connection like in the morning and shut it down at night? If so, can you tell me wich file or extension I should use.
Best regards,
Hi everyone ... i have a big problem.
i use my HTC S710 ex dopod c500 as navigation equipemnt too
software i use is ROUTE 66 MOBILE 7 and gps bluetooth device Garmin GPS10
i not used it for a while about one month. Now i try to use but software tell me that cant estabilesh connection with GPS device. i try to reinstall software ... hard reset phone ... change rom ... but still not work ...
GPS device work cz i trye to conned it with navigation software on notebook and work well ....
I test mobile bluethoot tranfering files and work well ... he see GPS device and pair well ....
so ... why smartphone cant connect with GPS?
thanks everyones
Try with other software like Efficasoft GPS Utilities
I try with Efficasoft GPS Utilities as you told me ... but still not work. Software see my device, estabilish connection ... something happen : i can see altitude incerase and decrease ...
i dunno how to post here pic of my mobile screen ... any way this happen ...
only Alt. change ... N and E always 000000 Sat 6/0 some times 5/0 ... when i tun off gps ... GPS utilities give me error ... so mean mobile and gps in some way comunicate.
I try with TOM TOM ... not work too ....
i feel problem is in mobile's bluetooth configuration.
i try creating "new outgoing port" in mobile .... set com6 and com7 ...
same ... no work
really dunno why some weeks ago work perfect .. and now not
try again gps and notebook ... work perfect
plsss help meeee
i try again today ... driving car GPS on and Efficasoft GPS utilities on .... the only data i can get from satellite is Altitude ....
sat always .... 5/0 .... dindt get N and E
pls help meee ....
why before work .. and now not?
hi
you must name the gps "OTHER BLUETOOTH GPS"
when you sync it with the phone
it will work well with tomtom and other soft
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
matrix77 said:
I don,t know with tomtom but with Efficasoft GPS Utilities you must check in Menu->GPS Setup->AutoSearch Bluetooth GPS reciver, and see if there is your device, or choose manual your device.
After that don't forget to go to Menu->Start GPS
Click to expand...
Click to collapse
i try in this way exactly .... he find my GPS ... but after start GPS in main menu ... can get only altitude.
i just reinstalled HTC official ROM ... but still the same.
i changed navigation software with Garmin Mobile XT and maps from Mapsource.
work perfect ...
sunno why with garmim software work but other software nop.
My Gps module is garmin gps 10d ... maybe now work only with garmin software .. but i know before i used with tomtom and route 66.
anyway ... garmin mobile xt is good too
tnks
Good morning I have a probleme with Garmin XT and my HTC VOX it connect has my GPS but rest blocked on research satellite
install this cab and then try
View attachment enablegps.CAB
it has few registry tweaks enabling gps connection
this will help you connect
his step always not
I think your GPS programs might have been "fighting" for the GPS data or that it had bad epheremis data. It is recommended that with WM 6.1 and above to have the GPS "managed" by the system.
You do this by going from the Start Menu to Settings to System and select External GPS. Then you want to select the Port your programs will use to obtain GPS data. Normally the four lower ones were commonly used by most computer systems which is why I recommend selecting COM9 as the port.
On the Hardware tab, you need to identify which Port your GPS is on. I used GPSToggle, which is a Today plug-in, to start and warm up my GPS. You can read about GPSToggle here: http://www.freewarepocketpc.net/ppc-download-gps-toggle.html.
Download the CAB file which I recommend installing to your device internal memory. Then go to your Today screen and then to Settings menu followed by Today. On the Items check the box next to BAF GPS Toggle. Click okay and this will place GPSToggle on your Today screen.
Unfortunately most smartphones do not have dedicated GPS chips because they eat battery power. On a dedicated receiver like a Personal Navigation Assistant (handheld GPS aka PNA), the GPS is turned on automatically when the PNA is powered up. Depending upon when your GPS was last activated, a dedicated SIRF chip can go from cold-start to 3D fix in as little as 42 seconds and as long as three minutes if epheremis data is present and the GPS has not been moved more than 10 miles from its last power up.
For most smartphone users, the last time your GPS was fired up was when it was built in China or wherever. The GPS can retain that information as its old epheremis data which is used to communicate with satellites. If the data is bad and old, it can take much longer for your GPS to lock-on and get a 3D fix.
For this reason, it is recommended that on smartphones that a GPS utility like the ones mentioned above be used. In essence, the smartphone's GPS must be "warmed up" from a cold start state to warm state where it is communicating with satellites in resolving a 2D fix ultimately to hot state where 3D fixing is available.
GPSToggle on your Today screen will "warm up the GPS" for you when you turn it. You will then see bars indicating the number of satellites the GPS has found. Once it syncs with them, the bar will go solid. When four bars go solid, 3D fixing is available. At that point you could turn on your satnav program and should be good to go.
If you see the altitude and nothing else comes in then the BT connection is obviously ok, so pairing, establishing the connection via COM port and the program using the connection seems ok.
Your problem then is the GPS receiver not sending the data required.
Find a program that resets the GPS receiver, if you can remove the battery put it out for half a minute and reinsert it. Once the GPS has a satelite fix again it should deliver all data.
A good free powerful utility is SirfTech - obviously only useful if your BT Mouse has a SIRF chipset.
prajith said:
install this cab and then try
View attachment 82758
it has few registry tweaks enabling gps connection
this will help you connect
Click to expand...
Click to collapse
Hello, was enablegps.cab developed here on xda? If so, is there a thread on it?
hello ...
I have a polaris with windows mobile 6.1 ptg (official), and each time that I configure the gps settings are not saved...
when you enter in "definitions">"System">"external GPS".
After entering the software gps port to "COM4" and then I set the the gps hardware port to "com7" (for example) and speed of the port to "115200", after I click "ok" to save the settings back to come and see that the software GPS port "COM4" and the hardware gps port in set to "(none)" and speed of transmission is in "4800" ...
will be some flaw in the Windows registry? I tried again to install the windows mobile and radio but remains the same ...
that someone help me
sorry my english
Mine does the same as your's, however with the built in GPS reciever and set to automatically manage GPS, why would you need to worry about external GPS?
see this post: http://forum.xda-developers.com/showthread.php?t=330235
wviegas said:
hello ...
I have a polaris with windows mobile 6.1 ptg (official), and each time that I configure the gps settings are not saved...
when you enter in "definitions">"System">"external GPS".
After entering the software gps port to "COM4" and then I set the the gps hardware port to "com7" (for example) and speed of the port to "115200", after I click "ok" to save the settings back to come and see that the software GPS port "COM4" and the hardware gps port in set to "(none)" and speed of transmission is in "4800" ...
will be some flaw in the Windows registry? I tried again to install the windows mobile and radio but remains the same ...
that someone help me
sorry my english
Click to expand...
Click to collapse
i have ptg too..hello brother
what gps software are you using? try to use another
translating:
que gps as a utilizar? tenta utilizar outro..sim e ja agora pq externo?
my original tomtom is 6.033 and its built in on the rom wen i make a hard-reset... but i want to use tomtom7 and i cant get any signal or detect the internal gps because this problem... and i dont want to use tt 6.033 because i dont have activation code to use other tt6 maps...
EDIT:
i see this post
http://forum.xda-developers.com/showthread.php?t=330235
and this
http://www.modaco.com/content/kaiser-kaiser-modaco-com/258943/a-word-of-warning-re-gps-settings/
anf i have see a part of the problem...
"*** Warning! Do not change the external GPS setting!
You should see "external GPS" icon in the Settings->System, do not change anything there.
You might need to hard-reset your device..."
i make a hard reset on my polaris and go back to original tomtom 6.033 (8358), search on google and find a map activator do tomtom maps v660.1219 and worked fine to me!!! now i have "Mpas PT_ES v660.1219" and "Western Europe 660.1256" working fine and activated in my polaris
Tanks for the help guys!
hi,
im using mda compact(htc magician and 05 64mb rom cotulla ) i have tomtom 7 with new maps demo works great ,only problem is can not get tomtom to see my bluetooth gps!
(gps works with a program called sky traq only settings i needed to set up is find bluetooth device and then connects, picks satellites up in a split second )
my question is there a program that will tell me what port my gps device using? is there away maybe with a registry editor to find out what port tomtom 7 is using?and possibly if needed a program to see what com port my bt 541 gps device uses or needs??
bluetooth setting
do i pair(i imagine i need to so i have
secure connection tick or untick?
bt com port?
only have choice com 6 com 7!
what are the recommended settings in external gps ?
program port?
hardware port?
manage gps automatically do i tick or untick? i have tried lots of settings i got as far as seeing no gps device in tomtom but with satellites greyed out like its stuck but i cant remember settings i used
hope some one can help me out ?????thanks for taking the time to read my post
Hello all i have an problem with the Winmobile from d-two
I use it on an I-Mate PDA2K PocketPC Blueangel (RC5 23698 Multi-Rom)
1st to d-two GREAT WORK
but i got some problems with the WIFI i found my network but IE or Opera tell me that i was not connected to the Inet...
But im connected with my router... with 100% signal...
so is there any fix or trick to solve the problem?
THX a lot
regards,
k1ll3r8e
Argh forgotten...
HW Versions here:
R 1.15.00
G 1337.45
D WM6.5.5
hmm i found a trick but not a solution...
if i turned on DHCP and let the PDA get the IP via it, the Inet work fine, but why not with a static ip?
can some1 help me pls?
regards,
k1ll3r8e
no1 who can help me?
so sry for the spam but i cant enter the right forum right now, coz it needed 10 posts... and no1 can or want help me...
Start - Settings - Connections - Connections - goto Advanced Settings
Select Networks __ Set your programs to use your privat network
THX for the tipp but it wont fix the problem...
If i appear the settings and switch back to an static ip, the inet dun work. The networkcard says it is connected but all apps say check your connection. If i return to an DHCP IP all will work fine.
regards,
k1ll3r8e