Hi.
After some changes It seems the new version of bandswitch is compatible with HTC Polaris. Bandswitch is used to swith from 2g and 3g quickly with only one click, enabling to save bettery keeping in 2g and using 3g when needed.
Dani
Thank you, provides very good this application
thank you guy , it seem it work very good on my cruise !
Nice
I couldnt test it on this device because I dont own one but It seems the system to change the band is the same than kaiser, instead of Hermes....So I ve modified it to behave like if It detects the device is kaiser...
Dani
i got a problem, when people try to reach me they automatically get my voice mail (in normal phone settings) i also have problems calling myself (stops a few times and then after trying again suddenly connects). same with messages long delays in receiving and sending...
after setting the band to GSM they can reach me but i have the idea that i cant use 3g????
is there a problem with the phones function t switch between 2g and 3g and do i need this app (bandswitch) for it or is there something with my phone or my opperator-settings?
Hi.
It is operator issues. I have same problem here in Spain with Vodafone. But this problem doesnt happen with Movistar. Being in 2g, if gprs is connected AND there is data flow in that moment then if someone call me it appears as phone turned off. Some friends of mine are telecomunication eng. in vodafone and says Its the sw version of the system, but not related with the pda or its configuration.
Greetings
Dani
ok, thnx
sw version of the system? (do u mean software..)
but is there something my operator can do so it works or must i keep on switching myself in my phone settings?
or do u suggest to use bandswitch?
yes,software.
HTC roms allows to change the band but the process is slows(many clicks). Because of this bandswitch was borned. In fact if you see the first post (in hermes forum) I was searching for a today plugin to switch quickly the band. I didnt find any and I developed this tool. Other operator rom doesnt provide a way to switch the band. Why? I suppose 3G generates more data traffic and more meney for telcos so they fix their devices to 2G. SO you have to use other tools (like bandswitch or commmgrpro) to change the band.
Greetings
Dani
Hello Daniel,
Should V2.5 work with a Cruise that uses the Murata radio?
I dont know that ROM. Today will be out V2.6 beta. In this version I ve changed the way to manage connections because some devices (htc touch, samsung i780) doesnt implement correctly some RAS functions so I hope management connections works for these devices too..
Testers for bandswitch v2.6
Its a beta.
Connection management didnt work correctly on this device because a known problem in some RAS API functions didnt implemented.
http://www.commmgrpro.com/CommMgrPro/files/BandSwitch.V2.6.cab
Changes:
1) Connections management(Stablish, close) has been replaced with IpHelper API so It should work with HTC Touch, Samsung i780 and others. Can you test it?. It would be nice if It was tested with currently working devices (tynt, hermes, ....) and not working devices (touch).
2) Keyboard appears automatically on license and text controls.
3) Unsintall process backed up registry settings to other registry place. It was causing in some devices error uninstalling. It has been solved. When you install old version It can cause error but continues with the installing process.
Greetings.
DAni
pd. Testers will have free license, of course
Testing? Yes!
Hey Dani!
I`ve just downloaded the cab and test it now.
How could I give my feedback?
Frank
Hi,
Here or by mail to [email protected]
Dani
Hi Dani,
i tested your program.
My device XDA Orbit2, O2 Germany, bepes rom 0.67.
worked well for me, only 2 small design issues.
1. every time when starting your program the "auto"-button is grey and not the button i selected before.
2. the "control-box" does not funktioned, only the "close app"-button.
greatings
ppcfox
sorry my worse english
ppcfox said:
Hi Dani,
i tested your program.
My device XDA Orbit2, O2 Germany, bepes rom 0.67.
worked well for me, only 2 small design issues.
1. every time when starting your program the "auto"-button is grey and not the button i selected before.
2. the "control-box" does not funktioned, only the "close app"-button.
greatings
ppcfox
sorry my worse english
Click to expand...
Click to collapse
Thanks ppc
another Buttonbug?
Hey Daniel!
I turned off the Speaker for 30 Minutes with the switcher. After that the speakerbutton shows "Speaker off".
And after a softreset the UMTS GSM Buttons show automatic, but i switched to GSM permanently.
So far
Frank
Nordlicht277 said:
Hey Daniel!
I turned off the Speaker for 30 Minutes with the switcher. After that the speakerbutton shows "Speaker off".
And after a softreset the UMTS GSM Buttons show automatic, but i switched to GSM permanently.
So far
Frank
Click to expand...
Click to collapse
Thanks Frank
When bs is shown the auto button is always focused because Its the first one but it doesnt mean the device is in auto mode. Look at the tray icon. g means gprs. a means auto, etc. I will take a look again to the speaker
Thanks!!
Touch Cruise rom udK R1:
I can't install it, keeps asking me for a serial number.
Once any version of bandswitch you ve 15 days to use it. The countdown doesnt stop even if you install other version. I will do a separate system for betas that doesnt watch if there was any other version installed some time...
2.6.1 works fine
Hey Daniel!
I just installed your new version and it works fine, the button behavior is fixed and i found no errors whit switching 2G/3G, speaker WiFi or BT.
All fine so far, but the beta expires in three days...
Frank
I have a Treo 750 and a Gtop G33 BT GPS. When I try to connect I can get to the password and if i put nothing in (Gtop says no password needed) and press next - it connects (light flashes slower) but Treo asks for Password again and this time it wont allow me to press next till I put a password in (next is grayed out.) I've tried 0000(Gtop says use 0000 if devise must have a password) and 1234 but as soon as I press next again GPS disconnects (light flashes fast again) and Treo says it is now connected.
I have been all over this sight for the past 2 days and have learned a lot, I even flashed my rom, OS-WM 6.1 WWE lite and radio1.54.07.00, but so far I still cant get this to work (bluetooth), perhaps I cant see the forest for the trees.
Any help would be greatly appreciated!
Jim
GPS CONNECz
Check to see if the treo proccessor speed 300Mhz is compatibalbe with the GPS RECR.
else i don't know I'm a novice
Me too- only with bluetooth headset
I had the same issue under WM5, but did found a way past it once and then of course it was irrelevant. That was months ago and now I can't figure out how I got past the problem. So I'd appreciate it if anyone could clue us in.
Thanks
I've managed to find a way past this
There appear to be multiple versions of WM6.1 around. I had the same problem until yesterday when I re-upgraded to a different version of WM6.1.
Not sure of the version (I'm in New Zealand, so using an Australian rom).
The version that doesn't work is easy to spot as there is no battery indicator and it uses the Microsoft Inbox for texting. The version that does work has the battery indicator and uses the Palm version of texting.
Once I'd got to this version, it no longer insisted on having a bluetooth password.
Cheers, Hope this helps.
Hi!
I have a TP with a WM 6.5 ROM and I installed the application SmartLock 1.7b.
It's a great application and it makes me save a lot of battery!
The only problem is that when TOMTOM is running it locks me the screen after a few secs, since there is activity (just driving) and then suspend the device (and when I turn it back on I loose signal).
I uninstalled Smartlock and there is no problem... So, I was wondering if you have similiar problems with TOMTOM and Smartlock... and how to solve it (I already went to TT preferences and changed the safety ones)!
Thanks in advance!
Deiota
Hello,
I have the same problem to you .
Yes, it's painfull ;x
Hi all,
I've posted this in the Iolite/Cruise 09 section as well. I'm posting here so there's a better chance of answering my question.
I just got my Cruise 09 delivered last week, it replaced an Eten M600 which finally died a month ago !!
I'm really happy so far, it could do with one or two more hardware buttons , but it's not really a problem.
I've been trying out TomTom , and bought the Europe maps, it works perfectly so far.
I have a question I hope someone can answer for me - Is it possible to turn off the phone and still use the GPS ? When I turn the phone off and try to use TomTom, I have a message on screen "All connections are disabled (Flight mode) "
Is there a way around this ?
I will be driving abroad soon and don't want to leave my phone on all of the time.
Thanks
you can turn it off but you can prob toggle the screen so you save a bit of power
that way
thing is when suspented the phones disable the sd interface to save power
and thats where most people keep their maps
It's a design flaw of TomTom. Other GPS apps work in flight mode though. You can turn the phone off but leave the wifi and/or bluetooth on. Driving with the phone off seems like an unnecessary/bad idea. Any good reason for it?
Hi ,
Thanks for the replies.
Wilhelm said:
It's a design flaw of TomTom. Other GPS apps work in flight mode though. You can turn the phone off but leave the wifi and/or bluetooth on. Driving with the phone off seems like an unnecessary/bad idea. Any good reason for it?
Click to expand...
Click to collapse
The reason I wanted to operate Tomtom without the phone turned on is because when I go away on holidays I usually turn my phone off. After all , the whole idea is to get away from it all and try to relax, not be answering the phone all the time.
I'm planning on driving around Scotland, and will be using the GPS on my new Cruise.
I've just been experimenting with my phone. If I have wifi enabled and the gsm off, Tomtom says flight mode enabled.
If I have Bluetooth enabled but wifi and gsm off , Tomtom works !
I also just got an email response from HTC, as follows --
HTC Customer Care said:
Dear valued HTC customer,
Thank you for contacting our Customer Support Center. We are dedicated to providing you with the best quality service and answering all of your questions and concerns.
You recently wrote us about an issue that you have encountered with your HTC Cruise 2
To clarify your issue, you stated that: Hard reset operation
There must be a bug into the software, if the flight mode is visible into the system this can be just a software problem, if the flight mode is inside the tomtom software this can be the distribution of tomtom , please try the hard reset.
HARD RESET OPERATION.
1.Start
2.Settings
3.System
4.Clear Storage (before performing please make sure that you run a backup using active sync)
------------------------------
If the above steps do not resolve your issue, we invite you to visit the support area on our Web site. Please go to: http://www.htc.com/www/support.aspx
Click to expand...
Click to collapse
It appears they think I should do a hard reset.
Would this not just reinstall tomtom with the same bug ?
.
Hallo, recently I installed a MN 7.3.0 on my Wizard O2 branded working under WM5. At begining it friese the hole phone but then I make a shortcut direct to MobileNavigator.exe and everything works fine.
Problem is at startup it always show TMC message screen and I dont have idea where to kill that
I looked to other forums and experimented with Usersettings.xml without sucees.
If somebody have a hint would be nice
Thanks