i have a mda compact,i ran the unlocker software from this site and now,my device has lost the bluetooth.
it says no buletotth device fitted
any hlpe or ideas please
thanks
Related
Hi,
Im trying to upgrade my uk mda compact to one of the lastest roms, with no luck!
I have been trying for days now, feel like ripping my hair out!
ive tryed lots of different roms, all with the same error, Error 150, it says the utility was not designed for my device
ive been using MaUpgradeUt_noID, and putting the pda in bootmode
please help what am i doing wronge?
I've had the same problem..
Maybe a 'byte copy' from the original to the new rom has to be performed?
Can anyone confirm this?
Already done the BigStorage but not really sure of the benefit of the latest one (i still have the original shipped one).
Its pretty easy, will be doing it on Monday, if you guys are in the UK perhaps we can get on IM or something and I'll walk you through it.
Before then, please make a backup of your original rom usint the d2s procedure, you will need it should you ever return your MDA under warranty.
Bob
What I did was to disable activesync.
I then put the MDA into bootloader whilst disconnected from the PC. The bootloader should say Serial.
If you then plug it into the PC, the screen should change to USB.
Let the PC find the device and say that the hardware is ready for use.
Now run the upgrade_noid.exe program and it should work.
Stu
I have bought cheap m600 on ebay, it is G4 (SPL with *.001), and all works perfect but it didn't seem to recognize any sim card. Allways display invalid sim. I tried different sim cards and always the same problem. Anyway emergency calls still work and I can call 112. Somebody know what colud be wrong?
Anyone has solution for this??
try to unlock the phone. i think it's in the wiki
open & read :
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
SPV M600 Unlock
Im failing to unlock SPV M600, with SPL 2.10.001, using Lokiwiz03a. My problem is in reading the cab files in M600 (Cert_SPCS and EnableRapi) when i transfer them by bluetooth or Memory cad i fail to see them in the phone so that i can run them (this is what its giving me: "Could not update itsutils.dll to the current version, maybe it is in use?")
I have used the method in this thread
http://forum.xda-developers.com/showthread.php?t=404223
yotamui said:
Im failing to unlock SPV M600, with SPL 2.10.001, using Lokiwiz03a. My problem is in reading the cab files in M600 (Cert_SPCS and EnableRapi) when i transfer them by bluetooth or Memory cad i fail to see them in the phone so that i can run them (this is what its giving me: "Could not update itsutils.dll to the current version, maybe it is in use?")
I have used the method in this thread
http://forum.xda-developers.com/showthread.php?t=404223
Click to expand...
Click to collapse
Try and use the cable, rather than bluetooth.
Also, make sure you've checked the "Show All Files" on the devices file explorer (right soft key).
thanks mate. I used the cable but cant locate the files. i cane only locate or run them in the phone if connected to the PC.
Use the batch file from lokiwiz to try and unlock it.
l3v5y said:
Use the batch file from lokiwiz to try and unlock it.
Click to expand...
Click to collapse
Thanks mate, for your affinity to help the world will be a better place with people like you, this worked, after running the batch file it gave an error, i restarted the SPV and i located all the files. theSPV is unlocked now
yotamui said:
Thanks mate, for your affinity to help the world will be a better place with people like you, this worked, after running the batch file it gave an error, i restarted the SPV and i located all the files. theSPV is unlocked now
Click to expand...
Click to collapse
No problem!
Hope it works well now!
If you start flashing ROMs, you will become addicted!
l3v5y said:
No problem!
Hope it works well now!
If you start flashing ROMs, you will become addicted!
Click to expand...
Click to collapse
the phone is working fine, will try the ROM flashing, thanks mate
Can someone please help me unlock an MDA compact. I recently upgraded from a BA to an MDA CompactII aka Magician sim locked to T-Mobile. In past I unlocked my BA no problems with the tools on the site.But have tried the the tools posted by 'ITSme and Machinagod' but to no avail. THe model I have is model number PM200 and it is running windows mobile 2005 OS 5.1.195 Tried lokiwiz but always get an error message whilst following the instructions precisely. Can this phone be unlocked or do I have to contact T-Mobile and pay them for an unlock code?
Thanks JD76..
My mistake sorry Compact II is actually known as the CHARMER
Sorry I believe I made an error the Compact II is not otherwise known as the Magician but the CHARMER. My apologies.
No harm telling us what sort of error messages are displayed when you tried to unlock your phone.
Which lokiwiz are you using to unlock your phone?
http://wiki.xda-developers.com/index.php?pagename=HTC_Charmer
Take a look at the two version available.
Thanks to all I just noticed that there were new versions of lokiwiz out 3 & 3A. Managed to unlock using 3.0 but only after installing and executing the enablerapi.cab file on my device. Thanks again..JD76
Trying to unlock MDA compact II
Hello people.... I'm trying to download a software to unlock my PDA.... found a website http://www.ecompserv.co.uk/unlock-mda-compact.html that charged me £6 to download a software.
When I run the software from the device it give a message saying 'unknown deviece type PM 200 see xdadev_all_unlock.log file for details'.
Does anybody can give me some help to unlock this devide?
Thanks,
Canis
Canis said:
Hello people.... I'm trying to download a software to unlock my PDA.... found a website http://www.ecompserv.co.uk/unlock-mda-compact.html that charged me £6 to download a software.
When I run the software from the device it give a message saying 'unknown deviece type PM 200 see xdadev_all_unlock.log file for details'.
Does anybody can give me some help to unlock this devide?
Thanks,
Canis
Click to expand...
Click to collapse
that tool doesnt support the PM200 (charmer/mda compact 2) and shame on them for charging for a program that is avaliable free on here!! to unlock use lokiwiz 3 thats on here. http://forum.xda-developers.com/showthread.php?t=265928
Unlocking Without Cable
I misplaced my usb cable and would like to unlock my MDA compact II - Can I use Lokiwiz with infrared on my laptop?
I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102
brent39902 said:
I've been trying to find a thread that addresses my issue but have'nt been able to find anything addressing my issue.
I wanted to upgrade my 8125 G4 (IPL/SPL 2.25.0001) to WM6 so I tried the guide for "newbies".
I have windows XP and Activesync 4.45. I was able to establish a connection with my 8125. I ran the HardSPL and it confirmed my device is G4 and it went to the utility.
I followed the utility and was able to reconnect and reestablish connection with activesync. after rebooting my phone the IPL is 2.21.0001 but the SPL is still 2.25.0001. Can you tell me why it did'nt change to
2.21.olip?
I then tried rerunning HardSPL but when the utility asked me to reconnect and establish connection with activesync activesync does not discover the phone. Otherwise am able to use my phone just fine and can even activesync with my laptop.
I did not continue to other steps for fear of bricking my phone since the guide says not to continue if SPL isn't 2.21.olip.
Can anyone please help me get back on my way to WM6?
my phone is:
Rom 2.25.11.1 wwE
radio 02.25.11
Protocol 4.1.13.12
ExtRom 2.25.11.102
Click to expand...
Click to collapse
Multi Posting !
Instead of starting a new thread practically in every forum is not going to get you help immediately and is not advisable,its always better and more beneficial if you post in the appropriate forum and thread related to the subject and problem.There are better chances of getting help sooner and by reading that particular thread might help you to solve your problem as many may had this problem and got it solved.
Thanks for the tip.
I particularly don't like redundancy, but since the other forums also deal with similar topics I thought multiposting would be ok.
Do you recommend one particular forum?
I thought the upgrades forum would be ok, but since I have a G4, well...you know.
hi
I bought AMEO 16GB on eBay (UK). It's sim-locked to T-Mobile (it's asking for unlock code when o2 card instered)
I tried to use AthenaUnlocker to get it unlocked, but it didnt work.
Details:
Step1 (flash SPL), Ameo would go into Bootloader mode, but it freezes and I'm getting CONNECTION ERROR
I decided to skip step1 and launched SSPL-Manual-x7510.
I started step 2 (UNLOCK RADIO) and upgrade went up to 7% but then I got INVALID MODEL ID error
I flashed my device with x7510_HSPL365 and changed rom to WM6.5.3-28205_x7510_1.2_BETA_VICO, but it didnt make any difference...
Additionally now device isnt asking for unlock code, it's just showing NO SERVICE
please advise
update:
AMEO 16GB - I had to buy unlock code for 7 pounds - it worked like a charm.
I had same problem few weeks later with MDA AMEO 8GB. After removing folder "TempAth" from drive D: on my PC, AthenaUnlocker worked fine
I hope this helps
I have the same problem with my Ameo 16GB. The question is whether there will be impact if I follow your description step by step and what not to do?
Unlocked with little changes in patched radio!
emde18 said:
hi
I bought AMEO 16GB on eBay (UK). It's sim-locked to T-Mobile (it's asking for unlock code when o2 card instered)
I tried to use AthenaUnlocker to get it unlocked, but it didnt work.
Details:
Step1 (flash SPL), Ameo would go into Bootloader mode, but it freezes and I'm getting CONNECTION ERROR
I decided to skip step1 and launched SSPL-Manual-x7510.
I started step 2 (UNLOCK RADIO) and upgrade went up to 7% but then I got INVALID MODEL ID error
I flashed my device with x7510_HSPL365 and changed rom to WM6.5.3-28205_x7510_1.2_BETA_VICO, but it didnt make any difference...
Additionally now device isnt asking for unlock code, it's just showing NO SERVICE
please advise
Click to expand...
Click to collapse
I have the same problem with getting signal. it doesnt promt for any unlock code. just dont get signal.
Can anybody help us?
T-Mobile AMEO 16GB SIM lock
peshko said:
I have the same problem with my Ameo 16GB. The question is whether there will be impact if I follow your description step by step and what not to do?
Unlocked with little changes in patched radio!
Click to expand...
Click to collapse
Hi,
I got HTC Advantage X7510 (T-Mobile AMEO 16GB) which is SIM locked, after
boot up it shows "you have tried 15 times, please wait until
timeout", I tried with the ROM upgrade still no luck as it's showing
the "No Service". The phone is booting properly and all the other things
work except call facility.
Device name : HTC_X7510
Windows Mobile 6.1 Professionl
CE OS 5.2.19209 (Build 19209.1.0.2)
ROM version : 3.27.405.3
Radio version: 1.58.00.00
Protocol version : 32.91.7020.20W
ExtROM version : 3.27.405.104
Model No. : ATHE400
I've have successfully done x7510_HSPL365. Boot loader now shows:
ATHE400
IPL-v2.02
ATHE400
SPL-v3.65.Olinex
I also tried with WM6.5.3-23153_128DPI_x7510_6.2_VICO ROM but it also gives
"No Service" and now reverted it back to
RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship.
Could you please advise and help me to unlock it, your help and advise will
highly be appreciated and surely will make the donation for your good work.
Thanks in advance.
Best Regards,
Anshuman
Crowleycator said:
I have the same problem with getting signal. it doesnt promt for any unlock code. just dont get signal.
Can anybody help us?
Click to expand...
Click to collapse
I have also the same issue, seems nobody can help us from xda developers .
After putting any SIM display shows "you have tried 15 times, please wait until timeout". There is no prompt for the unlock code.
Installed different ROMS for more than 20 times, still no joy.....
peshko said:
I have the same problem with my Ameo 16GB. The question is whether there will be impact if I follow your description step by step and what not to do?
Unlocked with little changes in patched radio!
Click to expand...
Click to collapse
Hi peshko,
I got HTC Advantage X7510 (T-Mobile AMEO 16GB) which is SIM locked, after
boot up it shows "you have tried 15 times, please wait until
timeout", I tried with the ROM upgrade still no luck as it's showing
the "No Service". The phone is booting properly and all the other things
work except call facility.
Device name : HTC_X7510
Windows Mobile 6.1 Professionl
CE OS 5.2.19209 (Build 19209.1.0.2)
ROM version : 3.27.405.3
Radio version: 1.58.00.00
Protocol version : 32.91.7020.20W
ExtROM version : 3.27.405.104
Model No. : ATHE400
I've have successfully done x7510_HSPL365. Boot loader now shows:
ATHE400
IPL-v2.02
ATHE400
SPL-v3.65.Olinex
I also tried with WM6.5.3-23153_128DPI_x7510_6.2_VICO ROM but it also gives
"No Service" and now reverted it back to
RUU_Athena_HTC_WWE_3.27.405.3_1.58.00.00_Ship.
Could you please advise and help me to unlock it, your help and advise will
highly be appreciated. Kindly advise.
Thanks in advance.
Best Regards,
Anshuman