Related
Help,I'm stuffed![After loading WM5 my phone won't work.I get a message saying that it can't connect to network.I've not had it long and have not used the phone before apart from a test with a friends sim card (and it worked then)I've tried 3 sim cards in it that are all current but tu no avail,it refuses to connect.No messages saying it's blocked or anything so I don't think I've bought a stolen phone (how do I find out?).one message I've found says file "sim_mg"cannot be opened'either is notsigned wit a trusted certificate or one of it's components cannot be found,could this be it?I'm OLD and my brain doesn't work too well with phone setups (carrier pidgions in my day) can anyone help? Rocketsize=18][/size]
Phone
You might has bought a stolen phone, ring up your network provider and ask them to check th imei. Alos hav you tried reflashing the handset back to its original rom?
thanks for that,I'll ask them (didn't really think of that as it has worked on my friends sim) how do I reflash the handset to it's original rom?I slipped up by loading wm5 and I don't have win2003 (why don't they provide a disc?anyone know where I can get a copy?I've tried Ebay but nothing there at all)I'd like to go back to wm2003 ,5 doesn't do anything for me ,just a lot of progs don't work with it (TomTom for one).Thanks ,Rocket
Right if you do a serach on the sit you will find out how to
Then on to your next point abou getting the actual rom, if you are a registered use and go to the ftp, you will find your self many differnt roms for your phone.
Refernce flashing there is aa slight elemeant of risk, so I for one would say read around in the forum and read the guide well before hand.
Hi all,
Not had any response in the Alpine group, so thought I would ask here because from looking at old posts, It appears this problem has afflicted several models.
I tried to use the blueooth for the first time in ages and I get an error message saying the license has expired, then the bluetooth is turned off automatically.
I found some earlier articles about this problem, and they suggested a solution was to install a Broadcom bluetooth driver update, which the author posted as an attachment. I installed this and reset the device, but when I click on the bluetooth icon I just get the same error message as before.
In case my customised ExtROM was the problem, I installed the standard O2 1.11.169 ExtROM, but the problem is still there. This is wierd because I have used bluetooth under that ExtROM version successfully in the past!
Can anyone help me???
I bought a kit that had 2 USB transmitters to add to PC's without Bluetooth. It was by Energy Systems.
Unfortunately, the fist time i installed it, it gave out this error. The one regarding expired license.
I have never got to use it and was wondering what the fuzz was all about. If you do get it working, please inform me about the solution on how to get rid of the license expiration thingy.
Thanks
your choices are 1.Get a new phone. 2.Look for the latest driver for your phones Bluetooth and try to install it. 3.Try factory resetting your phone. hope it works out.
Greetings,
I recently had my phone stolen when someone smashed my car window and grabbed my phone and GPS unit. I was thinking about ways to either deter theives or perhaps even catch them after the fact.
My first thought was some sort of program on the phone that would send information about the phone back to a user specified email address. For example, let's say the person installs a new SIM card and powers up the phone. The program could auto-run and send you the new phone number now assigned to the phone. I am not sure how this would work for non-SIM phones as I don't understand how those phones get their "phone number". In addition to the phone number it could send any informaiton like Owner Info that also might help identify the person now in possession of the phone.
My second thought was why not tap into the GPS device that so many phones are now equipped with and send GPS coordinates as well. This might be difficult if the phone company locks access to the GPS functionality.
Last but not least I was wondering if there might not be a way to determine that a new SIM card was installed, even if a master reset was done on the phone. The big problem here is that you would need to have the code included as part of the firmware as a master reset might possible wipe out any internal memory on the phone. It might be interesting to flash a warning on the main screen of the phone indicating that "This Phone is Stolen" if someone tried to put their own SIM or reprogram the phone with their phone number.
Naturally I know you can "lock" the phone which will render it useless but that won't necessarily help you get it back. I figure most of these "smartphones" have enough intelligence to at least send out a text message or something.
Has anyone seen anything like this or have any ideas on what might be possible?
Thanks
TC
There are several different software packages that already do this. One is called W.I.M.P. - Where Is My Phone:
http://www.wimp-software.co.uk/
Doh! I should have used Google.
Thanks for the tip.
Anyone using WIMP? I have the demo version and am having issues getting the GPS to work. Windows Live and Google Maps work fine. Not sure why WIMP is having issues.
What???
cowboyshootist said:
I recently had my phone stolen when someone smashed my car window and grabbed my phone and GPS unit.
Click to expand...
Click to collapse
Why would you leave this laying around in you car? My Tilt (or any phone for that matter), electronic device, and wife () always leave the car with me....
mchapman007 said:
Why would you leave this laying around in you car? My Tilt (or any phone for that matter), electronic device, and wife () always leave the car with me....
Click to expand...
Click to collapse
Well, I was heading into the LA Fitness gym in Mill Creek WA. There are generally lots of people coming and going in and out of the gym and Mill Creek is not what you would call a high crime area. The phone was not in plain sight but in the cup holder between the front seats and you would have to look real hard to even know it was there.
It was actually the GPS unit that attracted the thief. Normally I put that in the glove box and take my phone with me but as I mentioned above I didn't think I was in an area where I had to worry about car break-ins.
Even so, phones get stolen all the time. My daughter had hers stolen right out of her purse at her High School. It can happen even when you don't think it can. Applications like WIMP or PhoneBak are the only defense you have against something like this. Given the technology that exists in smartphones there's no reason they can't report themselves stolen and if they have gps (like the Moto Q9) even give you their location.
The funny thing is the thief was stupid enough to put his contacts onto the phone without having done a hard reset. The next day all his contacts were synch'd to my new phone and I now know who stole the phone.
Sprite Terminator is another one that does all of the things you want, remote lock / wipe / gps , etc
Thanks Dave.
KMS
Dave G said:
Sprite Terminator is another one that does all of the things you want, remote lock / wipe / gps , etc
Click to expand...
Click to collapse
There's also Kaspersky Mobile Security for XDAs - you can block sms acces, wipe PIM data and it has a nice little feature that will send out SMSs to two numbers of your choice if the SIM is swapped, then block the unit until you enter a code - thus giving you the new mobile number to take to the police! only takes them about 20 mins to find the name and address of the thief!
http://www.kaspersky.co.uk/kaspersky_mobile_security
And it's got a firewall and antivirus thrown in, too!
Bird
Bird_FAT said:
There's also Kaspersky Mobile Security for XDAs - you can block sms acces, wipe PIM data and it has a nice little feature that will send out SMSs to two numbers of your choice if the SIM is swapped, then block the unit until you enter a code - thus giving you the new mobile number to take to the police! only takes them about 20 mins to find the name and address of the thief!
http://www.kaspersky.co.uk/kaspersky_mobile_security
And it's got a firewall and antivirus thrown in, too!
Bird
Click to expand...
Click to collapse
Thanks. I was aware of this product. I am not too keen on annual subscriptions but it certainly seems to have all the features you might want for cellular phone security.
Mobile justice, it's freeware.
Bye
Hi if you installed kaspersky mobile security latest version, and you forgot the code? how can you reset code or change code to newone?
Thanks
I recently just got a Samsung Jack i616 and it had Windows Mobile 6.0 on it. I upgraded it with the official 6.1 upgrade from Rogers, and everything upgraded fine. But when I call someone, or someone calls me I can't hear them and they can't hear me. I know the phone worked before the upgrade, but now I'm not sure as to why it's doing this. I've tried restarting the phone, but nothing has worked. I haven't found anything on Google, so I thought I'd post it in the forum that I know has come up with so many miracles that made my HTC Touch Elf so enjoyable.
Any tips would be greatly appreciated.
**Update**
Fixed the problem by dialing *2767*3855#
This thread can be deleted
same problem
Hi
I am having the same problem. have you resolved the problem. I would like to see your solution as this is driving me up a wall.
Fibrolan
P.S. I am on the fido network
I have experienced this same issue. I bought a new i616 on the Fido network, upgraded to wm6.1, made a test phone call, and then removed the sim.
While the sim was removed I setup all the software I use (took about a week) and played around with the phone (GPS, etc) to be sure I understood it's capabilities. And then I put the sim card back in - exactly the same issue you have had - it makes and receives calls but there is no sound on any end.
I fixed this by doing a hard reset (with format) - immediately after the format, I tried a test call again and it worked (sound on both ends). I then proceeded to setup the phone again (this time with the sim card still in it) and at the end of installing all the software, the phone still worked.
I have no idea why it stopped working in the first place.
The code you mention does a EEPROM reset which appears to be a carrier unlock on some phones - is your phone now carrier unlocked?
On a side note, the software/hardware on this i616 appears to be a complete train wreck - the GPS sometimes works, sometimes doesnt, sometimes the phone does not allow sound when making phone calls, the bluetooth doesnt connect to some of my devices that have never had any connection issues in the past, etc. These are pretty fundamental issues. I have had a couple of HTC WM phones for the past several years and I have never experienced anything like this with them - perhaps the Jack will grow on me but just setting it up has been a pretty poor experience.
Well, it happened again - no sound on either end during a phone call. I havent done anything since the last rebuild - eventually the sound stopped working.
A full reset with format fixes the problem but I think I have reached the limit - I am not going to rebuild it again because I have no idea when the phone stops working - I do not know what to do differently.
I am going to return this phone for something else - this phone has been remarkably bad (especially for a phone which gets great reviews).
Any ideas what is going on?
same issue
So far the only way to resolve this is the format... rogers says the phone is defective but considering the issue is more than just me I expect a replacement jack is not a guarantee that this issue will go away...
Hi,
I think I have found the culprit that is causing the problems. whe you do an unlock for application, the problem will start happening. not installing the unlock application the phone will work fine.
the only real benefit for the unlock application is getting the gps to work on com4. most applications will work without running unlock.
if anyone has way around this I am listening.
Fibrolan
fibrolan said:
Hi,
I think I have found the culprit that is causing the problems. whe you do an unlock for application, the problem will start happening. not installing the unlock application the phone will work fine.
the only real benefit for the unlock application is getting the gps to work on com4. most applications will work without running unlock.
if anyone has way around this I am listening.
Fibrolan
Click to expand...
Click to collapse
What unlock application are you talking about? Since I fixed the problem myself, I've only had the problem once, which was probably from trying to install a bunch of applications to my phone(which I fixed just by restarting the phone).
The * code that I posted was from the BlackJack II Rogers 6.1 Instructions
I believe he is talking about the application unlock. There are two things I put on my phone that require it - the GPSID thing (connect the GPS to a COM port), and WM5torage (phone looks like a USB drive).
I will format, and will not apply the unlock, and see what happens.
Thanks.
So I've been running into this problem more and more often now. It's seemingly random as to what triggers it. I've tried pulling the battery..turning it on and off..nothing seems to work. I don't really want to do a full format because I don't want to lose all my stuff on there.
I've also found out even with a bluetooth headset, I can't hear anything..I also can't hear anything if I plug in the headset that comes with the phone.
Hopefully we can find out a solution as to why it does this.
Ah so I am not alone.
My fido jack on 6.1 that is also application unlocked (Some of my apps do require this to be done, one way or another..) is doing the same thing. Sometimes I just have to reboot a few times in a row and it comes back, but as of this morhning I've done it 3-4 times and still no sound.
I have given up. I have decided not to app unlock the phone - it is the only way to guarantee the phone still functions as a phone and I have tried many, many things to get it to work. This definitely limits the capabilities of this phone.
This phone is a disaster - the GPS does not connect through a com port like almost every other GPS device on the market, not all of my bluetooth devices work with the phone, and if you app unlock it, it stops working as a phone.
I like the scroll wheel though.
any progress on this?
i have same issue:
-i616 (fido/roger jack)
-want to get GPS working
-but app unlocker will break sound (no sound during calls) on WM6.1
i think the unlockers are only for i617 blackjack2, but not for the canadian version...
any ideas???
I am still trying to figure out the root cause of this problem. Yesterday it happened again to me so I pulled out the battery, removed the sim card, and then reinstalled everything and it worked - no hard reset required. It hasnt happened since so I havent tried the sim card removal again, so it could just be a fluke.
But, if it does turn out to be sim card related, is it possible we are using older version sim cards? The phone came with a new one but I just stuck to using my older one. What abaout everyone else - new or old sim card?
Thanks.
I also have the samsung jack (fido) i616 and also cannot hear the calls on both ends on occasions...even prior to app unlocking so it may not be the app unlock that is causing the issue.
I would turn off and on the phone and it would work again.
Is there a permanent solution to resolve this?
Thanks in advance
Samsung Jack i616 - Can't Hear Calls - Callers can't hear me
I was scanning the xda-developer site as I have both a TytN II and a BJII and thought do I bother telling my story or not - I figured if I can save someone else the hassle, the Major headaches, the time and the Expense it is worth it. So hear goes, get a coffee and put your feet up as this is a long story. If you just wanna know the outcome and solution skip to the end..otherwise just settling in for the story.
Like many of you I bought an BJII from a well known Chinese Mall(PM) and at the same time got it unlocked. I got the phone home and immediately upgraded it to the Fido WM6.1 official rom as I had been using 6.1 on my Tytn II forever without any major headaches. This was my first mistake. (actually my 2nd the first was buying the dam phone in the first place). Right after the upgrade, after making a call, the caller could not hear me and I could not hear them. Only a Hard reset(HR) fixed the problem. After the reset, I then proceed to install some smartphone apps, (sda application unlock, MoDaco smartphoneGpsActivator, MS smartphone GPSID, Garmin Mobile XT etc) after installing my seventh app I decided to make another test call. I encountered the same problem, so I set about uninstalling one app at a time to see which one was the culprit. This did not work and only a HR would fix the problem. This nonsense installing, hard reseting went on for about a week.
Frustrated I took the BJII back to PM, but the dude did not want to give me my money back - he claimed because I had upgraded to 6.1 any software upgrades regardless of whether it was an official rom or not was not covered under warranty. At this point I was not sure whether I was facing a software issue or a hardware issue. Anyway, I took the phone home, and this nonsense with the phone and calls went on for weeks. The last straw for me was being in the mall with my wife and she's calling me and I did not hear the phone ring. Was she mad or what? So to prove I was not dodging her and eying up the babes I got her to call me while I had the phone in my hand and sure enough the phone was ringing, but there was no sound. We did this 4 times- I switched the phone on & off each time - so another HR - problem goes away.
I am Hugely frustrated by this point , however, I set about reinstalling my apps - as a side note one of the apps that I wanted to install was SPB backup 2 - BJII didn't like it so I could not use it hence having to reinstall each app everytime 1 by 1 after a HR. Anyway, this demon possessed phone would at least 3 times a week need to be HR. I was so frustrated that I decided to try the At&t rom,(Mistake #2) it crashed in the middle of the upgrade and bricked the phone. It would not turn on period. Now before you start, I am not a newbie, I have been messing around with windows smartphones and pocketpc for years - in fact my first pocketpc was a compact and it was grey scale, my first ever pda was a Psion, so I know how to flash phones, and cook my own roms.
Anyway, I took it back to PM and the dude wanted to charge me $150 bucks to fix it. I walked out the shop and tried another vendor he said that he would reflash it for $50. He had the BJII for 3 days and in the end could not fix it.
I took the BJII back to the original guy, I tell you I am a pacifist but I am ready to kill at this point and we almost get into a fight as I was wholly convinced at this point that it was a hardware issue. He refused to send it back to Samsung as he reckoned they would charge me an arm and a leg to fix it as they would know straight away that this was a software flash that went wrong. In the end he said that he could fix it for $80 bucks- given that I wanted this phone and I wanted it working(it is great for messaging) I said fine. Yes he did get it working, but had to install a new logic board(motherboard). Thankfully he also installed WM6.0. I decided to leave well alone this time and just install my apps. I have had the phone back for 2 weeks now and have been using it everyday and have had none of those call or sound issues.
I suspect that there is a serious problem with the 6.1 upgrade and it has nothing to do with application unlocking the phone or any other 3rd party software. No presenting any keys in any combination is going to magically fixed this call issue - so please don't be fooled. My advice if you want it, is to Not upgrade to 6.1 at all. WM 6.1 offers some nice features, but not enough to go through this amount of headache, frustration and money.
Anyway peeps Happy New Year.
And avoid WM6.1.
Smartb
Smartb - I liked the story despite the fact that I cried more than I laughed. Seriously, I couldn't agree more with you. Indeed this 6.1 upgrade is the cause of our pain. I've spent hours doing the same thing you have less the ROM installs.. Mine came with the Rogers 6.1 ROM installed.
I'm at a loss for what to do. My latest venture is to compare registry settings with a HR image and after installing a software that breaks the phone. The software I tested with that always broke the phone was SPB Wireless Monitor..
I could ALMOST live with the issue if SPB Backup worked. But of course, it breaks the phone too!
So far, I've successfully gotten these softwares installed without the phone breaking:
- MS GPSID
- TCPMP + FLV Plugin
- Activesync with Exchange
- Garmin Mobile XT
- Facade 1.4.0
- CHome Configurator
These break the phone:
- SPB Backup
- SPB Wireless Monitor
- SDA Unlock
Any ideas how I could downgrade to WM 6.0? My phone came pre-installed with WM6.1
Dave, I don't think you can because there is no 6.0 rom floating about out there believe me I tried. I spent hours looking for one and couldn't find any. There were other roms for the 607, but I wouldn't risk using those. Sorry Mate.
Smartb.
Rogers is sending me the 6th refurbished Samsung Jack
I am having the same audio problem described here. Hard reset, which is every "tech support agent's" answer to everything, is NOT NECESSARY.
I have popped the battery out and stuck it back in and this has worked, other times it has not.
I have turned the phone off and on again and this has worked, other times it has not.
Rogers is sending me the 6TH REPLACEMENT Refurbished phone I have received, I may ask them to start sending 2 at a time, just to be sure.
They won't allow a hardware switch, they will only replace the phone with the same phone. They will try to get me to take a hardware upgrade though for like $200.00 and make me agree to 3 more years.
I am only hoping that the next refurbished one I receive will have this 6.1 bug fixed.
Here's my take on this...
Had this problem from pretty much day 1 with the i616 from Fido, it would occur randomly and intermittently (I could go 3 weeks without experiencing it). But about 2-3 weeks ago, it seemed to be stuck like this, switched to my nokia phone, called fido and they sent a replacement. In the meatime looked for something to backup the current phone to transfer everything to the replacement. That ended up being sprite backup.
Got new phone, made some calls it worked fine. Backed up old phone with sprite and restored to new phone. New phone now has same problem. Start uninstalling, no joy, eventually wipe clean, try restoring again, same problem, wipe clean, install a few of my apps, works fine for a few days, then same problem. Uninstall all 3rd party apps except SK Tools Standard, audio works again.
Wipe device install only a few apps, working fine, this morning I install sprite backup and audio goes away, uninstall sprite audio comes back...
Next send message to sprite support as follows, we'll see what they have to say, next step would be to backup, then wipe and only install sprite and see if problem reoccurs or whether it's an interaction with one of the apps below.
Samung Jack SGH-i616 (aka BlackJack II) running windows mobile standard 6.1, call audio stops after installing sprite 6.5.4.8. This consistently happens when installed and problem goes away once uninstalled.
It's a manifestation of this problem
http://forum.xda-developers.com/showthread.php?t=439620
The following other software is installed on the device.
Webis Flexmail 4.1 beta (bulld 3317)
Webis Pocket Informant 8.52 beta (build 2339)
(note problem occurs with non beta versions of both apps)
Sk Tools Standard 3.3.3.1
Synthesis SyncML Pro 3.0.2.22
Total Commandder/CE 2.51
The rest are the standard apps that ship with the device in rom.
Unicornasaurus said:
I recently just got a Samsung Jack i616 and it had Windows Mobile 6.0 on it. I upgraded it with the official 6.1 upgrade from Rogers, and everything upgraded fine. But when I call someone, or someone calls me I can't hear them and they can't hear me. I know the phone worked before the upgrade, but now I'm not sure as to why it's doing this. I've tried restarting the phone, but nothing has worked. I haven't found anything on Google, so I thought I'd post it in the forum that I know has come up with so many miracles that made my HTC Touch Elf so enjoyable.
Any tips would be greatly appreciated.
**Update**
Fixed the problem by dialing *2767*3855#
This thread can be deleted
Click to expand...
Click to collapse
I didn't use my brain before typing this code. This code effectively hard reset my phone!!! no warnings or anything.
I´m having a problem with unlocking.....
I have the "an unknown error occurs, which may be a network connection issue. Please wait and try again later."
I've seen that many people have had this problem and signing up for the device tracker would be a good idea. I tried to sign myself up for the device tracker (to check if my serial number is in their data base). This didn't work, so I called the asus support and they told me that the device tracker doesn't work and that they're on it (which I highly doubt)... But I did ask them the question whether they could see if my serial number is registered there. They said that when they typed my serial number they saw that it was connected to my email-account so they thought this was the answer to the question. I don't really know whether it is, but I still can't sign up for device tracker or unlock the tablet....
Please help! (The motivation ship is sinking...)
Also I have changed all the settings correctly I think: Two-step-verification = disabled, apps with lower security = enabled, usb debugging = on, unknown sources = on
Mailing tech support
I have send the following mail to support and I'm awaiting their response....
---------------------------------------------------------------------------------------------------------
Dear Asus support,
After having bought this product of yours a couple of years ago, it now runs like a slug. That is why I would like to unlock my tablet using the unlock tool (the 7th version) supplied by your site. It is not working however and I keep getting this message: "An unknown error occurs, which may be a network connection issue. Please wait and try again later.". Now I have read on multiple forums that many people have experienced this problem already and that the fault lies with the asus server and not with my tablet. I know that you will need my serial number and mac adress which I've put below so that you can send the information to the main server in Taiwan. I will be happy to provide you any other information you might need.
Furthermore I think it is very foolish to enforce such a vague policy regarding unlocking, which in the long term will only lose you your reputation and your customers (and therefore money). All I want is for this unlocker tool to finally work. I will not stop until this problem is finally resolved, so please do not try to brush me of your shoulders....
serial number: /////////
Wifi mac adress: ////////
Kind regards,
Kostis
Receiving support
The customer support was quite friendly actually.
They did not say anything about not supporting unlocking and sent my status information to their main office immediately. They said they corrected the database, but I´m still not able to unlock my tablet. So now I really wonder what could be the problem.....
anyone????
I just had this same problem, resolved in mid-May.
I started a phone desk request since I didn't have a serial in Settings ->about tablet in mid-April. That was fixed quickly, thanks to xda.
THEN I was told that my serial number was for a motherboard, not a tablet.
After struggling to get them to understand and not just dismiss the unlock issue, I got the ASUS helpdesk to send the information to Taiwan (TW) for the server upgrade, I waited two weeks with no answer back. When I checked in, letting them know I was still waiting, they told me TW had updated the information. I had other things to worry about by then, so a week later, the tablet unlocked easily (on the third try.) The problem is, as stated in another thread, pairing of the MAC address and the serial number in the TW database.
Try a few times. If it still doesn't work, and you get the bogus network communication error, it's back to the emails. Continue by replying to the last one; they have different people answering to the same name so track by number. There are at least two servers: If they didn't state it was an update to the TW server specifically, that's the problem.
IF you get to the Google log in, and it doesn't go, or it says you have the wrong info (password, user name warning), TRY AGAIN. and again, and again. Eventually, Google will ask you if you want to change the correct setting. Check your email at this step too: I was using my daughter's account on her tablet, but Google even sent her a message stating they had blocked a hack attempt on her account... with someone who KNEW HER PASSWORD! We approved the device thru Google (links on the email) and we were golden.
(BOY did I have an issue with getting ASUS techs to even admit that there was a way to update the TW server... the ASUS device tracker is no more: ASUS won't be supporting it any longer, since Google has their Mobile Device Tracker up and running. They'll tell you that unlocking the device means you can't track too, which is definitely not true. --tested)
My daughter's 700 is now running on Crombie-KK (with patch), 'cause while she's an aerospace engineer (almost), she doesn't "get" computers.
TF 300 on firmware still (needs research), but unlocked and rooted for digitizer board update
TF700T with LCD issues, trying to resolve
Thanks XDA!!
I´m happy that the issue is resolved for you, however they did specifically say they updated the information on the Taiwan servers for me 2 times. So should I just keep pushing and telling them that they are bull****ting me and they should try again?
kostis95 said:
I´m happy that the issue is resolved for you, however they did specifically say they updated the information on the Taiwan servers for me 2 times. So should I just keep pushing and telling them that they are bull****ting me and they should try again?
Click to expand...
Click to collapse
I would say it more tactfully; you don't have to be nasty to get decent service from them, as tempting as it gets.... As Droidbound says, "you need to be a Polite PIA." (If they send you the survey, be direct and honest, but be professional.)
I would also call the phone "help line" for the (don't tell them) serial number using only your MAC address and make sure that the information they give you matches what shows on your status screen. THEN have them check to be sure that the same serial number is actually linked to a tablet, not a motherboard. Call twice, using each call server. Add this information to the line of emails that you have already started.
If you haven't already, make sure you have the correct version of the "version 7" unlocker. Doesn't hurt to doublecheck.
Keep in mind it did take me several tries to get the unlocker to actually work, even after they updated the TW server. I have read stories of the unlocker not working for up to 50 tries, and then it miraculously does.
My TF701t is giving me the unknown error when I try and unlock, too. The machine is out of guarantee, but it had a new motherboard fitted under guarantee and I guess the problem is that it has a different serial number. I have emailed support repeatedly, giving them both original and new S/Nos and the MAC address, and they seem to have trouble understanding my simple request to ensure their database carries the correct information. In fact, I'm not sure the person responding always reads to the end of the thread because they keep repeating questions and suggestions.
I have registered the new serial number, but they say that the unlock tool still won't work because the new serial number will be recognized as a motherboard not a device.
Their only suggestion is to send the machine in as the "software may have been injected incorrectly" - does that imply that the serial number could have been set to the original but wasn't? - but as the thing is out of guarantee that will be at my expense.
Keep in mind that the 701 is a different creature than the 700. However, it does sound like the problem is the same as mine was.
The real problem is the server in Taiwan (TW) does not have the proper, updated serial number (and maybe MAC address) for your new motherboard linked to your tablet on their database. (yes, you got the correct answer, but maybe not the correct correction) This is part of the warranty work you had done, but it wasn't completed. You do NOT need to send in your tablet again. This isn't an installed software problem: it's a paperwork problem.
That being said:
First things first: does your settings information show a serial number? If so, half the battle is won already, even if it's the new one. If there's not a serial number, search xda for serial number programming: it worked for me when my tablet did not show one internally. (if I were to do this again, I'd try to put in the old serial just to see what would happen in the unlocking but I'm a maverick that way... lol)
The fight comes in when you're trying to have them update the server in TW. I think the thing that worked for me was sending an email to [email protected]. I don't know if Tien works there anymore, but the email WILL go through, and his section worked out in 2012 or 13 how to fix the issue. It WILL get done.
In the email, give them the RPA number when the warranty work was done (if you still have it), the old serial and MAC number, and the new serial and MAC number. You can openly state unlocking purposes.
Give it about 2 weeks after the email. You will want to check your ASUS account for any followup: i didn't get any communication directly, but a new RPA was started.
Loads of thanks for that. You're correct, I should be in the TF701t bit of the forum, I ended up here by accident but the problem is exactly the same and the necessary fix the same.
Mailing UK support is completely useless, they are not at all helpful, beyond offering to examine my tablet for £50 minimum charge.
My settings shows a serial number, which is different from the original, and I have given both to support. I don't think I have my old MAC address, though; but I do have the repair details so I will try your polite email to Taiwan technique and let you know how it progresses.
Thanks again. More help in one email than in multiple daily exchanges with Asus.
Schnr47 said:
Keep in mind that the 701 is a different creature than the 700. However, it does sound like the problem is the same as mine was.
The real problem is the server in Taiwan (TW) does not have the proper, updated serial number (and maybe MAC address) for your new motherboard linked to your tablet on their database. (yes, you got the correct answer, but maybe not the correct correction) This is part of the warranty work you had done, but it wasn't completed. You do NOT need to send in your tablet again. This isn't an installed software problem: it's a paperwork problem.
That being said:
First things first: does your settings information show a serial number? If so, half the battle is won already, even if it's the new one. If there's not a serial number, search xda for serial number programming: it worked for me when my tablet did not show one internally. (if I were to do this again, I'd try to put in the old serial just to see what would happen in the unlocking but I'm a maverick that way... lol)
The fight comes in when you're trying to have them update the server in TW. I think the thing that worked for me was sending an email to [email protected]. I don't know if Tien works there anymore, but the email WILL go through, and his section worked out in 2012 or 13 how to fix the issue. It WILL get done.
In the email, give them the RPA number when the warranty work was done (if you still have it), the old serial and MAC number, and the new serial and MAC number. You can openly state unlocking purposes.
Give it about 2 weeks after the email. You will want to check your ASUS account for any followup: i didn't get any communication directly, but a new RPA was started.
Click to expand...
Click to collapse
if this is when you try to unlock the bootloader i had same problem mine was a refurbished product
i finally fixed and unlocked the bootloader after months of trying to figure it out
i forgot what i frigen did to unlock the bootloader
i think i just deleted all my accounts like google play and gmail from the tablet and then did the unlock and worked
im not 100 percent sure if thats what i did cause i dont rmemeber well
give it a try and hopefully it works easy
Well I emailed them a while back. The email was given a unique number on their support site, but nothing has happened.
I have tried the delete all google accounts, I'm sure the problem in my case is the serial number. One unhelpful uk support reply just said "it won't work because your serial number is now the motherboard number not the machine number" and "send it in we'll fix it it will cost at least £50". Thanks a bunch.
I'm getting quite fed up with this, it should really be so easy, the poor support means I won't be buying another Asus product.
doveoscar said:
Well I emailed them a while back. The email was given a unique number on their support site, but nothing has happened.
I have tried the delete all google accounts, I'm sure the problem in my case is the serial number. One unhelpful uk support reply just said "it won't work because your serial number is now the motherboard number not the machine number" and "send it in we'll fix it it will cost at least £50". Thanks a bunch.
I'm getting quite fed up with this, it should really be so easy, the poor support means I won't be buying another Asus product.
Click to expand...
Click to collapse
EXACTLY the problem I had.
Unfortunately, the poor children answering phones and emails only have scripts to read: they seem to recognize only key words and have canned responses. No, they don't keep notes on your account, so you get the same answers and suggestions over and over. This can be played against them, for their understanding of your problem.
You do NOT need to send in the tablet. This is a data entry problem, not a software problem.
I agree with the level of support. unfortunately, the drive for "younger workers" and lower wages that a company prefers does not corroborate with the level of brain power inclusive in anyone who searches xda for answers, let alone someone who will post. Stick to your guns, and demand (nicely, remember they're just working people) that they update the server. Check on your new RPA and see if it has gone through.....
and try to unlock again. It's been four long months.....Maybe it will work this time.