I tried to upgrade my sx 56 now the only thing I can go is run test on the system. Cant get pass boot screen. I did once and my screen is scramble how do I get a usable system again
Related
hi all
i got a magician from a friend to play with but when i got it i only saw it starting up and then by align screen it would boot further
ive went to the wiki and checked ive i could find the combo for hard reseting this phone(whitout succes) i managed to find how to get in bootloader so i checked it
when i go in the bootloader my screen doesnt light on(is this normal because my other devices do this)
further it says v1.02 on the bottom of the screen
now ive tried to insatl the dutch t mobile rom from the wiki but i get a connection error
now ive seen that updating this phone doesnt go like on a blackstone\rhodium and it has something to do with a sd card in it?
i have the gap for sd card but not one in it(is this nessacary?)
after the connection errors i cant even see the align screen anymore it goes straight to bootloader when i press only the on button and getting out the battery for a minute and put it back in also brings me to the boortloader when i press the power button:S (now its working and i can get to align screen again:S)
can someone please help me fix this phone
best regards mini
You have Rome. You need from T-Mobils Rome:
- ms_. nbf
- nk.nbf
- radio_. nbf
All that in the folder suspended below copy. The device in the boat mode bring (On top the left and right key + power) Then you are able to do him flashen.
thanks for the reply
got a exe file to use but going to try to extract it when im home and hope i get those files from it
stil not working
tried it a couple of times but i always get this message
btw in bootloader it says v1.02 on the bottom
and strating in bootloader doesnt work at all for updating because the program doesnt see the phone:S
i have to get it started up to the point of align screen then connect it to comp with activesync
then i got those screens
when i start the phone i see the next things on the phone in spalsh screen
r1.12.00
g1337.42
d1.12.00
i dont have a memorycard in it dont know ive thats nessacary
best regards miniterror
one more with the back sticker so it really is a magician
If is a Magician. The mistake 101 means which does not fit the ID. What you can still try to protect your Rome and more than 416 bits, a Big Storage Rome to flashen. You can make this everything about memory map. You find instructions here.
ok i dont get it at all so i'll throw away the phone
thanks anyway for trying to help me
So i have got my HTC Touch Pro for half a year now, as time goes past i find the boot up speed is increasing or sometimes doesn't boot at all stuck at the Windows Mobile 6.1 Boot screen, now it takes about 1 minute to do a boot or sometimes i need to do a few soft resets. Anyone know why this is happening? Thanks in advance.
You may just be due for a hard reset. You could also try a registry optimization. It might just be worth doing a full backup-hard reset-restore cycle.
I'll second the hard-reset. Use some sort of backup utility for contacts, text messages, etc. I personally use Microsoft My Phone.
Hi all,
I bought a second hand Raphael on eBay. The previous owner said he flashed WinMo 6.5 and a HardSPL. Something seems to have gone wrong somewhere, because WinMo starts up and shows the welcome screen and then the touchscreen alignment dialogue over and over. As soon as I touch all five points, the alignment process starts again.
I have already re-flashed WinMo 6.5 an 6.1 with the same results. I have also added a WELCOME.NOT file and tried a soft reset. The file just disappears after the reboot.
The boot loader says as version numbers:
R 1.14.25.05
R 52.63.25.34u
D 5.00.00.00
I'd be glad for any pointers. Maybe a pre-calibrated rom?
Also, I actually want to run Android on the little fellow. Could I just try to flash LightNHB and run Android from there?
Thanks for your help.
Regards,
Kevin
That's not the bootloader screen numbers, but I don't think that's the problem. It may just be a crappy rom on there. Getting to the alignment screen is a good sign that the device isn't bricked. I would say just flash another rom; use one of the android-starter roms if that's what you want on there.
Thanks for the answer, unfortunately it seems the touch screen is broken
I managed to install Android using LightNHB, worked a treat. Androids calibration screen seemed to take all five poinst, but the coordinates it printed out where all on the same y-coordinate. The touch screen doesn't work in Android after that (I mean, how could it ).
I'll have a look around to see if I can buy a new screen for cheap.
I have an HTC Touch Pro2
ROM: 1.86.161.0 (67102) WWE
CPU: QUALCOMM(R) 7200
Running WINDOWS 6.?
I want to install Android, so have downloaded and tried to install 3 different *.cab versions. Each failes. The one I am persivering with is Rhodium and as I am in the UK and use Vodafone I have seected rhod100_uk
When I run it, it gets to the enter PIN screen, then the first errors occure. It will not let me enter the PIN until I have slid open the keyboard and then slid it back again. Once in I get errors come up, namely it says that either media has failed or Android... I select OK, and it comes back again. There seem to be no functions and I get a message saying the battery is empty.
I then decided to do an update, in the hope that may fix any bad files.
Now it opens only as far as the Enter PIN screen, when after a few seconds the phone vibrates and enters in to a restart.
Can anyone help me, please.
People, I've tried a bunch of assemblies and options for your phone after the display is changed to the Chinese and found that only 3 boot penguin display and inscriptions at boot true test, with those two idit load equally, and one with the other inscriptions but also hangs. These feeders: 1) polaimg-panel3-240x320-2.6.32-froyo-06-09-10_22 2) polaimg-panel3-240x320-2.6.32-froyo-09-09-10_21 3) polaimg-panel3- 240x320-2.6.32-froyo-27-08-10_23.
All three normally pick up the screen but the writing bug usb_vsync.
Founded on the Internet has the very first assembly androyda, who works in the demo rezhime.Reshil try to install it and wonder, android has started without any problems.
Here is a link to the installation package that will install this demo on your phone: hxtps://rapidshare.com/#!download|304l34|123389441|RUU_Polaris_Android_DEMO_v1_0.exe|72394|R~EC5F7C5EBDDD628BF8BFF91F71607033|0|0
Those who say they say android does not support Chinese screens, just a lie or do not know. At this assembly it is clear that androyd runs perfectly, and on the phones with a Chinese screen.
Most likely, DZO, or what the other developer of the kernel is not corrected. Suggest to write a petition to save money and to develop a normal boot. Let's say it can do the same DZO or what the other developer. I do not think it would be very difficult and time consuming. Who can help me in this, please come forward!
But there's more, I decided to try to run through the HARET andriod 1.5 on the same firmware WM and you think, android has started well!!
At the moment, try to build a working version of Ecler, I do not know whether I can or not but the fact that at least 1.5 works already happy!
That it happened. All the same I managed to run Android on my devayse 2.1-2.2. Of course there are problemma, and a large - is not responsible for nozhatie touch screen, but the fact that he obsalyutno normally displays everything on the screen is great plshyusom and proves once again that all the matter in the loader, which local craftsmen or they can not fix! !
Below we will explain how to start. If you do not get something right the first time, try again, I got yed)
1) Download the assembly android_by_polyrhythmic-beta3.zip (Look on the internet, I think problemma not be found)
2) Download the assembly polymod.rar.
3) Unpack android_by_polyrhythmic-beta3.zip and copy the folder on the SD android.
In the folder are 2 files android default and default-s, files and zImage-15-12-09 and zImage3. The file default by one run android in Haret changing the panel on 1,2,3. Each time you start when you have to wait for the LED zamegaet either blue, green or yellow, and goes off the screen. This would mean that the android booted and shut off the screen. After clicking on a retreat or off you will see a white screen.
After running all three panels so turn off your phone zaydmite to stick and move to folder android Fail of the default-polaris zborki polymod and change it to default. Replace the old Fail them, and then rename the zImage-15-12-09 in just a zImage. Now run the android. Wait until you have a light starts blinking LED goes off and the screen. As it happens, click on the rebound a few times. You will see a line of code and then the welcome screen android. Since the touch screen is not working I could not go further, but pressing the buttons can be issued to the soglashatsya message.
Here vprintsype all.
Try it. The point I was told, then I welcome your ideas and results!