Flashing light - General Topics

Hi
I've never had problems with this before, but I am now having trouble getting the light to flash red when I get an incoming sms.
I also have a situation where when I disconnect from GPRS it decides to flash red.
Any ideas?
Thanks
Anthony

I should add that this started yesterday, after I had done a hard reset and reinstalled with the following software only...
pocket plus 2.0
spb gprs mon 2.0
weather panel 1.7
kitara genesis
other stuff too but nothing that i would say adjusts profiles or notifications etc
A

My one has problems with flashing, too. Doesn't indicate charging even though inner progs say that it really is charging.
Me personally - I don't mind it doesn't do what it should - the battery's charging and that's important!

Which machine does this?
Pocket Plus and GPRS monitor are OK - never had any troubles with it.
My illegal blinking started long after I uninstalled those progs!

The II
I might try another hard reset and see what happens...
Cheers
Anthony

Related

Weird Polaris behaviour

My Polaris is kinda hasty, skippy, after a softreset. I notice it most when I run flash-animations.
Then after turning off and on the screen , it's smooth as silk!
This happens every time I soft reset!
I do have the same impression myself but I am having an issue with a bug in an app I'm running so I usually soft reset after a problem and have always put the speedup down to the bug having slowed down my device.
I suppose this is one other reason to use SpriteBackup that HTC supplies on the CD that comes with the device. I haven't used it myself yet (because I'm still playing and don't have what I consider to be a stable configuration on my device yet) but I believe that SpriteBackup automatically does a soft reset on the device before and then again after it has done a scheduled backup so you can get it to do it automatically for you in the middle of the night.
A soft reset on WM6 is pretty slow though isn't it. It feels like forever watching the thing restart.
- Julian
JulianL said:
I do have the same impression myself but I am having an issue with a bug in an app I'm running so I usually soft reset after a problem and have always put the speedup down to the bug having slowed down my device.
I suppose this is one other reason to use SpriteBackup that HTC supplies on the CD that comes with the device. I haven't used it myself yet (because I'm still playing and don't have what I consider to be a stable configuration on my device yet) but I believe that SpriteBackup automatically does a soft reset on the device before and then again after it has done a scheduled backup so you can get it to do it automatically for you in the middle of the night.
A soft reset on WM6 is pretty slow though isn't it. It feels like forever watching the thing restart.
- Julian
Click to expand...
Click to collapse
I don't think this has anything to do with any app. I think this a driver issue of some sort, that is getting the "hickups". Maybe touchscreen. I'll monitor the cpu use before and after turning the powerbutton on/off

Polaris/ MS voice command help Please

Regarding MS voice command on my Touch Cruise: The past few days it will not announce messages when the device goes into sleep mode. As soon as I bring the device out of sleep mode I get bombarded with New Email notifications. This is very irritating. I have performed several soft resets and even re loaded voice command with no change. What the heck happened? I have searched for the answer but all I find so far is issues with Bluetooth headsets. Anybody got any ideas?
I noticed I got my Blue LED back when I removed MVC and then re installed. It lasted 1 day and now it no longer blinks. Great...
Another ROM, or another VCM program... or a Hard Reset...
I think this is just the name of the game with this thing. System reliability is pretty high on my list though. All my tweaks/programs have been very minor so far, I might as well go big and load programs that Iv'e been holding back on. The end result may just be another simple Hard reset, gotta love Sprite Backup-Woo-Hoo!

[BUG] Unresponsive device after overnight / long charge

Greetings!
As mentioined in the first post of this thread: http://forum.xda-developers.com/showthread.php?t=418150&highlight=issue+list I have encountered similar problems.
I own my TP for 3 days (2 nights) and on both mornings after being charged over the night the TP was absolutely unresponsive and only to be awakened by a soft reset. It couldn't receive calls, and the alarm of course didn't work also (so I missed one this morning - but wasn't late at work) Anyway, this is a serious issue to me, since it makes the phone absolutely unreliable. And I am not in favor of doing regular hard resets by the way ...
Help on this would be really appreciated.
Greetings, hugo
Mine does this everyday, but have you tried pressing one of the buttons like the home button, I know nothing happens for a minute but then it comes back to life with out the need for a soft reset
Haven't tried ...
Well, I haven't tried pressing a button and waiting, but this is not exactly the behavior, to expect from a phone of this kind. You see this wouldn't solve the Problem of not being reachable by phone and missing appointments. In fact I don't know, that how long I was unreachable on phone and in my profession this isn't just disturbing but unacceptable.
Hugo
I've had the same problem, not every time it's charged, but enough times to be a problem. I've switched off TF3D (Start, Settings, Today, Items, untick TouchFLO 3D, tick some standard items).
The problem has gone. Of course, so has TouchFLO.
Cheers,
Graham.
graham.hughes said:
The problem has gone. Of course, so has TouchFLO.
Click to expand...
Click to collapse
This could be of course a last resort, but TouchFlo is quite nice to use (although I cannot get TF to use PocketInformant as calendar app, although it is defined as standard - the original MS calendar app must be hardcoded somwhere ...). And of course as TF is one of the main features of this phone a great amount of it's costs are caused by that software. So if I couldn't use it, the phone would loose a lot of it's value.
Isn't there a sort of event log in wm6.1 to see, which event crashes the system?
Hugo
I get a similar problem in that I lose all sound overnight, so I too miss my alarms. I also get no sound through the earpiece so, although it vibrates when it is supposed to be ringing, I cannot speak on the phone as I cannot hear the other person, and it seems they cannot hear me either, so it obviously affects the microphone as well. I have done a hard reset but it still happens, so it's definitely a bug with TF3D. I know this because if I try to play one of my music tracks using the music tab in TF3D, it plays for about 5-6 seconds (obviously with no sound) and then it crashes TF3D and restarts itself, which sorts the sound issue out. No need for a soft reset here but it's still unacceptable as my alarms are useless, and for £500+ I don't expect such a stupid flaw in the software. Hopefully, a ROM upgrade will sort this out, but when that will be is anyone's guess at the moment.
matmaneyre said:
...so it's definitely a bug with TF3D.
Click to expand...
Click to collapse
That's also my conclusion.
matmaneyre said:
Hopefully, a ROM upgrade will sort this out
Click to expand...
Click to collapse
I think that's what we have to wait for. Until then, it's a choice between bland-but-working or cute-but-unreliable.
have you tried any of these little mem resident babys to get your ram back and kill bad things while it sleeps
http://forum.xda-developers.com/showthread.php?p=2136914
Hmm...I'm just wondering why not more people are reporting this? Anyone NOT experiencing this problem?
Not till now I didn't
Using Stock ROM
I am more and more convicee, that TF3D is quite a buggy piece of software (Aussen hui - innen pfui!). Additionaly to the described above, I got a "broken glass" effect yesterday.
I sure do hope, that HTC releases a ROM update soon, although up until now the Touch Pro isn't even listed on HTC's german support pages.
Maybe I'll give SPB mobile shell a try ...
Hugo
Having same problem, not all the time though.
koppee1 said:
Hmm...I'm just wondering why not more people are reporting this? Anyone NOT experiencing this problem?
Click to expand...
Click to collapse
I have the same problem...
A few times already... even this morning.
TP is totally unresponsive and had to soft reset it to get it back alive.
ROM 1.90.401.1 WWE
Radio 1.02.25.19
Protocol 52.33.25.17U
I've had the HTC Touch Pro for about three weeks now, and since then it's crashed or become unusable at least once a day. I do not believe for one second that these issues are restricted to my handset, and comments on this forum back that up.
Problems I've experienced:
1. TouchFlo 3D screen corruption - "broken glass effect". The TouchFlo interface appears fragmented and split - it continues to function, but is unwatchable. The OS and other applications are unaffected. Cause unknown. Cured by soft reset.
2. Complete screen corruption + freeze. The entire screen gets a still image that looks like 'white noise' - random black and white pixels. The device is completely locked. Cause unknown. Cured by soft reset.
3. Device fails to wake up. Screen has been powered down, either having been switched off manually, or by timeout. Device later fails to respond to Power button. Happens occasionally without warning, and frequently (almost 100%) during overnight charge. Note - leaving the Touch Flo interface on 'Programs' tab (i.e. not 'Home') during charge seems to alleviate this (I don't yet have enough evidence to back up this claim).
I like this phone and its touch interface, but am pretty disgusted by the reliability issues, which I would guess are largely connected to the TouchFlo 3D code and/or hardware drivers. HTC really need to sort this out.
I've had the alarm fail on two mornings so far, needed soft reset.
I'm going to try disabling touchflo I think. Be nice to have pocketbreeze running again anyway.
Just out of curiousity
Do you have your phone set to turn off the screen even if it is charging? I don't have the Pro... yet, but with my 6700 I used to have to ensure the screen stayed on over night if I wanted to have a chance at the phone actually being responsive in the morning so the alarm would go off. Otherwise it would be as your Pro's seem to be doing. Will not turn on or anything until a soft reset. (It is not a fix by any means, I am just curious if it is still the same patern.)
I never charge over night simply to avoid it being charged for 8 hours straight. I keep a charge kit at work, and charge during the day as needed. In less than an hour, I get full battery. Then, I sit it next to my bed at night with no failed alarms.
Maybe it doesn't like the long charges.
I'm trying DCS's ROM now to see if it makes any difference at all. I'll report back in a couple of days. Maybe if I didn't have to charge it so often it wouldn't be so bad!
Wether screen is on or not, it doesn't make a difference. (Why should it on a working phone?)
I sincerely hope, that if those strange behaviours are gone in non stock cooked roms, that there will be some in German language as well ...
I am looking forward to another night!
By the way, SPB Mobile Shell didn't quite meet my expectations. (eg. it has also the sucking MS calender hard coded)
Experienced the "non-responsive in the morning" problem 2 times in 3 days, without the phone being charged. Both times I had the white noise effect on the screen.
Turned off TF3D (I like the phone more without it, actually) and the problem didn't occur in the last 5 days since I did this. It's most likely a TF3D related issue and it will prolly be fixed by the next update.
-KickFlo

Data problems related to S2U2??

This may be nonsense but I'm beginning to get a suspicion about S2U2 potentially being the cause of data connectivity issues for me.
I'm hoping I'm wrong because it's such a great program and I've used it on my last couple of phones.
Basically when I had my Touch HD, I had to reboot it pretty much daily if I wanted my data connection to work, otherwise I would get connectivity problems, but they would always be solved by a reboot.
I never figured out why this was, even though it was mega annoying. In the end I installed a cab to do a scheduled reset each night and it helped quite a bit.
Since I got my HD2 it has behaved perfectly as far as data is concerned and has not had a single connection fail with use every day for emails & browsing, UNTIL I installed S2U2 yesterday late afternoon, then last night it failed to connect. Yes you've guessed it, a reboot solved it.
I know that's hardly conclusive and I'm hoping it's not the case as I love using this program as an unlock screen, but I was wondering if anyone else has had any problems like this?
I was wondering if it was somehow also linked to my carrier too. The reason for this is that my friend also had a Touch HD and used S2U2 and never had this problem but he uses a different phone company. He now also has the HD2, and has installed S2U2 again and is fine, but mine is acting up, so it seems weird that it happens to both my phones but neither of his....
I know I could remove it to see if the problem goes away but programs sometimes leave bits behind when you uninstall.
Cheers
Jim
I get problems either daily or bi-daily where I have to reboot my HD2 to get my data connection to work again, (its connected but doesn't work). Every time its solved by a reboot.
I dont have S2U2 installed. If you find the reason behind the issue let me know as I am about to start doing a search into it.
Hmmm, maybe it's just coincidence then. But why would it have worked perfectly up to that point though, that's the thing that makes me wonder.
Mine also appears to be fine in terms of still displaying the GPRS signal/sign, but trying to retrieve emails or open the browser etc gives an error. It's maddening, whatever causes it!
Same thing again this morning when I told the phone to get my emails - connection failed. Worked fine after a reboot.
I'll see what happens tomorrow. If it does it again then I'm going to uninstall S2U2 and see what happens from then onwards. If it doesn't fix it then I guess it'll be a hard reset on the cards....
Back to original HD2 screen lock from 2SUS
Dear all,
Can tell how to change back to original lock after installed disable the screen lock? I don't like 2SUS needed so long to slide...
Just uninstall it, then press your windows button and hit the lock softkey.
I've removed it myself tonight even though I'm a long term S2U2 fan.
Since installing it a few days ago I've had even worse problems with ghost unlocks than before.
Previously the only issue was accidentally cutting calls off, but with S2U2 in use (standard lock disabled) I had a text from a friend on Friday asking if I was drunk. Somehow, whilst locked in my pocket it unlocked and sent a gibberish sms!
Then today, it also somehow unlocked in my pocket and dialled my mum!
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
But seriously - I love S2U2 from previous winmo phones but it's made my HD2 worse so I've uninstalled it tonight sadly.
Isn't there a working fix for these bastard hard buttons yet? I LOVE this phone but the bloody hard keys are ruining it.
Hi Cret,
Thank you so much for your response. I did remove 2SUS and selected the Screen Lock from pressing the Power buttom but it doesn't auto lock each time...
Can you tell what to do such change Registry or I need to restore the original setting?
Thank you, dude.
jakoo said:
Hi Cret,
Thank you so much for your response. I did remove 2SUS and selected the Screen Lock from pressing the Power buttom but it doesn't auto lock each time...
Can you tell what to do such change Registry or I need to restore the original setting?
Thank you, dude.
Click to expand...
Click to collapse
here we go use this cab or go to:
http://forum.xda-developers.com/showthread.php?t=583638 hack nbr 27
gdayhtc said:
here we go use this cab or go to:
http://forum.xda-developers.com/showthread.php?t=583638 hack nbr 27
Click to expand...
Click to collapse
he wanted it back... not disable...
Go to HKCU\ControlPanel\Keybd and change DeviceLockWhenSuspend to 1
This should re-enable the lock...
Thank you very much!
I will try to see it works on my HD2.
Mine was the same ie the lock would not return.
I already had BSB tweaks installed which had a toggle for the lock though, so I just activated that.
Cret said:
Same thing again this morning when I told the phone to get my emails - connection failed. Worked fine after a reboot.
I'll see what happens tomorrow. If it does it again then I'm going to uninstall S2U2 and see what happens from then onwards. If it doesn't fix it then I guess it'll be a hard reset on the cards....
Click to expand...
Click to collapse
Hi, did uninstalling S2U2 help on the connection failures?
Well, I only removed it last night but so far yes. I have not had to reboot the phone this morning and the data is working flawlessly.
Also - and this is a biggie! The battery life on the phone is MILES better without S2U2.
Normally the phone would be down to about 70% by lunchtime without even doing anything and it's still on 96% now - that's a massive improvement!
However, one thing has occurred to me as a possible cause of these issues - I've realised I was using a very old version of the program - v 1.5.
I think I'll try the latest one - 2.22 and have a look through the changelogs to see if there's anything mentioned in there along these lines.
Well, I only removed it last night but so far yes. I have not had to reboot the phone this morning and the data is working flawlessly.
Also - and this is a biggie! The battery life on the phone is MILES better without S2U2.
Normally the phone would be down to about 70% by lunchtime without even doing anything and it's still on 96% now - that's a massive improvement!
However, one thing has occurred to me as a possible cause of these issues - I've realised I was using a very old version of the program - v 1.5d.
I think I'll try the latest one - 2.22 and have a look through the changelogs to see if there's anything mentioned in there along these lines.
Here's two fixes right away in the next version relating to battery use:
- fixed the v1.50 issue of occasionally high CPU usage during idle.
- save more power than the old version when the device is sleeping.
v1.6
- removed option "Power Save" as the power leak problem is found & fixed.
I can't really be arsed reading through the rest of it but it's obvious there have been power issues addressed by subsequent versions so I'll try the latest and see how it goes.

Touch Pro Hard Reset While Charging

Hello,
Here is my issue, i have the latest TAEL Sense ROM from December. My phone just hard reset when i put it on charge while it's powered ON. This has happen on 3 occasions and does not occur when the phone is OFF and charging.
Here is what happenned the last time. Battery was low, just plugged the phone in for charging, came by after 1 hour and saw a miss called, tried to get to the call history screen, but impossible, HTC Touch Sense was not responding.
I was able to get to the windows 6.5 application menu while using the HOME button. Then I used the reset shortcut to reboot the mobile.
Took a long time to reboot(Normal boot screen) and then gave me the Stylus configuration screen, and booted up again to configure TAEL sense rom.
Then everyting gone, contacts messages,... like a fresh HARD RESET...
Does anybody have a clue why this happen ?
Could there be some issue with my battery charger ? or USB Cable ?
Or is this a ROM related issue.
Thanks for your feedback on this one.
thanks for the heads up, man. pretty much the same as in my thread: http://forum.xda-developers.com/showthread.php?t=613653
and i did forget to mention that both times it hard-resat itself, it was charging as well.
update: it resat itself when i got to work this morning, after being on charge all night.
same here 2 month ago with new Romeos: HR while charging...
did you solve it? any patterns?
Charging successful when mobile is OFF
Last night, i put my mobile on charge all night while it was switched off. when i booted it this morning, everything seems working fine... no resets...
There might be something going on with some applications that are installed on the mobile ?
all i had: calendar and contacts backup. t-mobile mms size fix cab, fuze keyboard fix cab. try leaving it on while charging!
disabled touch flo, put it on charge - nothing so far.
no resets so far - disabled the touch flo. any other feedback?
never mind: put it on charge earlier today and once i opened the keyboard the theme layout changed to stock, so i assume it's going to hard-reset once again
2 resets in one day
There has been 2 resets, yesterday night... i have tried to disabled HTC Sense and install Mobile Shell. but the OS was really unstable and when i rebooted was already hard reset... i wasn't charging the phone... seem to me, that this is an issue at the windows mobile 6.5 level... i'll post a link on Tael Roms page, maybe other persons have the same issue.
flashed back to stock 6.1 - no problems so far.
I've had the exact same problem, but with my Touch Pro 2. I started a thread here, but got no replies so far. I'm wondering if something in custom ROMs is causing this.
that's what it looks like. since reverting back to stock 6.1 no resets whatsoever. knock.knock.knock.

Categories

Resources