- - LeEco Le 2 ROMs, Kernels, Recoveries, & Other Deve

-

Reserved

-

alonsoj636 said:
Changelog for 2020/08/31
* Initial Build
Please tell me if boot and if it is stable for you. I will add overlays and other things in the next compilation
Click to expand...
Click to collapse
RR Q booted and stable enough, compile the next build with more features

New update is up!

alonsoj636 said:
Changelog for 2020/09/01
* Added Face Unlock
* Added Smart Charging
* Added Battery Health
* Added Live Display
Click to expand...
Click to collapse
Can dirty flash over previous build?

Naman Chouhan said:
Can dirty flash over previous build?
Click to expand...
Click to collapse
I prefer Clean Flash

alonsoj636 said:
I prefer Clean Flash
Click to expand...
Click to collapse
Changelog is of 1/09/20
Build is of 31/08/20?

Naman Chouhan said:
Changelog is of 1/09/20
Build is of 31/08/20?
Click to expand...
Click to collapse
Fixed . my mistake

alonsoj636 said:
Fixed . my mistake
Click to expand...
Click to collapse
How much battery you get on gaming?

Naman Chouhan said:
How much battery you get on gaming?
Click to expand...
Click to collapse
I haven't tried games yet. Try yourself and report

alonsoj636 said:
I haven't tried games yet. Try yourself and report
Click to expand...
Click to collapse
I tried gaming, standby is good but draining a lot while playing, any battery tweaks for gaming

How's the idle draining?
Sent from my Mi A2 Lite using Tapatalk

Naman Chouhan said:
I tried gaming, standby is good but draining a lot while playing, any battery tweaks for gaming
Click to expand...
Click to collapse
I don't think you can expect decent battery performance from a processor built on the old 28nm, least of all in games. There is not much to do regarding gaming

locovibe said:
How's the idle draining?
Sent from my Mi A2 Lite using Tapatalk
Click to expand...
Click to collapse
on my phone with intermediate use (light games) it's pretty good

Resurrection Remix v8.5.9
Device: LeEco Le 2
By: @alonsoj636
Build Date: 2020.09.03
Status: Unofficial | Stable
Changelog:
* Charging LED Fixed
* Battery Temp in Header Fixed
* Zram Disabled
Download: Google Drive (https://drive.google.com/file/d/1hznsrP2DA8oELV8rKQKYkti8tnejiSJh/view?usp=drivesdk) | XDA (https://forum.xda-developers.com/le-2/development/rom-resurrection-remix-8-5-9-t4156249)

New build is up , switched to Lineage 17.1 Tree so RR bit more stable , links in Post
Clean Flash Mandatory

Thanks you for your good work
The ROM is quite stable
Battery drain issue even in stand by but I have a doubt on my battery How to check my battery health ?
Heating a lot while charging
Camera goes blank sometime I have to restart my phone to get it back working

Screenlock
Screenlock was not working after 6 continue times restart the phone ex :- password, pattern pin etc.

What about download link? Gdrive link is off!!

Related

[ROM] MoKee OS 6.0.1 libra [STABLE]

Not my build. Not my ROM. I just want to share the news about first stable release of Mokee Open Source ROM for Mi4C 2/3GB.
If moderators think I am not appropriate to post here, please excuse me and delete the topic
MOKEE OS 6.0.1
Download: http://download.mokeedev.com/?device=libra&type=release
Android version: 6.0.1.
Status: Official
Release: Stable
Gapps Recommended: Open Gapps ARM64 6.0 mini
Revovery Recommended: TWRP 3.0.2.0. - touchscreen bug still present
Exposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
INSTALLATION:
Like any other time, except if you're already on Mokee Nightly builds, in that case just flash, no wipe.
ALL CREDITS GO TO RESPECTIVE DEVELOPERS!
Can anyone please check if FreeDcam (https://github.com/troop/FreeDcam/releases/) works on this?
GPS not working
Is this strictly a Libra rom? or is it built of the Kumajaya source for Libra/aqua?
Awesome either way
BlackXhorneT said:
Is this strictly a Libra rom? or is it built of the Kumajaya source for Libra/aqua?
Awesome either way
Click to expand...
Click to collapse
I would not flash it onto other devices. Kumajaya helped build the ROM, as I've seen his name in the changelog.
voolandis said:
I would not flash it onto other devices. Kumajaya helped build the ROM, as I've seen his name in the changelog.
Click to expand...
Click to collapse
Interesting, we'll try in on the Libra first then
BlackXhorneT said:
Is this strictly a Libra rom? or is it built of the Kumajaya source for Libra/aqua?
Awesome either way
Click to expand...
Click to collapse
NotChinaMobiles said:
GPS not working
Click to expand...
Click to collapse
Strange, seems to work for me...
Everything works fine for me, just huge battery drain due to wake locks.
voolandis said:
Strange, seems to work for me...
Click to expand...
Click to collapse
true, tested it today, it works also for me.
the first gps fix tims is just little bit long (30sec)
COMI80 said:
Everything works fine for me, just huge battery drain due to wake locks.
Click to expand...
Click to collapse
change battery profile to efficent. with this, i get almost 4 days standby with 2,5h sot
NotChinaMobiles said:
change battery profile to efficent. with this, i get almost 4 days standby with 2,5h sot
Click to expand...
Click to collapse
No need and no use, I use cm ts with 4 hours sot 4g and 6 hours on Wi-Fi., with a lot less wake locks time and battery consumption. Maybe in next releases will fix it, most of wake locks comes from mokee, so amplify and greenify are no use.
very good stable release. havent got any problems. thanks!
how to change camera frame from 16:9 to 4:3?
Sent from my Mi-4c using Tapatalk
Sorry,, newbie here.
Where can I see some screens of MoKee?
Does it have all languages?
Does it record video @ 4k like Miui 8 6.6.23 ?
Thank you.
i meet a problem with calling, when i put 2 sims and make a call, the phone will be reboot. No problem with 1 sim
Sorry for my english
mdio said:
Where can I see some screens of MoKee? .
Click to expand...
Click to collapse
screens: en.miui.com/thread-243792-1-1.html
i'm thinking of buying the phone because of its supposedly good camera and quite some ROM coverage out there (eg http://forum.xda-developers.com/mi-4c/general/team-superluminals-cm13-finally-t3284295):
http://www.gsmarena.com/xiaomi_mi_4c-review-1328p7.php
though i still couldnt figure out which camera chip the reviewer used... quite soem confusion out there about this. some say sony is better than samsung, some say not.
question for me would be :
what do you think about the ROMs in combination with the phone and final image quality?
Hi,
This rom is very stable
But for now does anyone experience stuck in booting screen?
I'm experiencing this since : MK60.1-libra-161117-RELEASE.zip
Anyone have this issue and fix it?
Thanks before
itang said:
Hi,
This rom is very stable
But for now does anyone experience stuck in booting screen?
I'm experiencing this since : MK60.1-libra-161117-RELEASE.zip
Anyone have this issue and fix it?
Thanks before
Click to expand...
Click to collapse
It is present severall last releases, I think that last stable was from 8 november
Mokee run flawlessly. My only complaint is battery life
The last 2 updates causes bootloop from 161113-161117, what is up? Is there any mokee dev here?
Love this rom so much as my daily driver, but now i'm reverting to xiaomi.eu
I really like this ROM what I do not like so much is what lasts the battery.
Enviado desde mi Mi-4c

[KERNEL][Karate] [Prk Kernel] [Discontinued]

Prk Kernel For Lenovo K6 / K6 Power
DISCLAIMER:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Some Kernel Features-
#1.1
Added Alucard Governor
net: Westwood+ Tweaks
Etc
#1.0
cpufreq: chill: Version 2.0
Added Wheatley governor
Added lionfish governor
Added IMPULSE governor
undervolt for our cpu, reduces heat, helps battery backup
Enable ADRENO IDLER
And many things :v
INSTALLATION STEPS:
Download correct version of Overload kernel
Make backup of system, boot in twrp
Now, wipe dalvik cache and cache
Flash the kernel zip and reboot
Enjoy
DOWNLOAD LINKS:
Download From Here
Source code:Github
Credit:
andip71
franciscofranco
frap129
Meninblack007
psndna88
renjian2
arter97
sultanqasim
karthick mostwanted
anarkia1976
myfluxi
DarkAbhi
XDA:DevDB Information
[KERNEL][Karate] [Prk Kernel] [Discontinued], Kernel for the Lenovo K6 / K6 Power
Contributors
ProPrk
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.1
Created 2017-10-12
Last Updated 2017-10-18
Reserved
select impulse gov in both big and small Cpu
and noop in I/o scheduler
For better battery life :v
Kindly mention if this kernel works only with custom roms 64bit or 32bit or works with Stock ROM Nougat too ??
Gonna try this. Is the kernel independent of the ROM? Can I use it with Lineage OS 15?
Woewww
[email protected] said:
Gonna try this. Is the kernel independent of the ROM? Can I use it with Lineage OS 15?
Click to expand...
Click to collapse
TESTED ON ROMS:
All Nougat Roms
Please Test it in Other Roms and Report it Below.
Harry_00s.HS said:
Kindly mention if this kernel works only with custom roms 64bit or 32bit or works with Stock ROM Nougat too ??
Click to expand...
Click to collapse
TESTED ON ROMS:
All Nougat Roms
Please Test it in Other Roms and Report it Below.
Forever Alone said:
Woewww
Click to expand...
Click to collapse
Nice trick to get thanks [emoji23][emoji23][emoji23]
Sent from my Pixel 2 XL using Tapatalk
Does not work on lineage OS 15, could not boot the phone anymore. After the initial lenovo splash screen, the phone lit up and dimmed again and again, and finally reboots to fastboot mode.
I know this isn't the place to discuss this issue but - why can't I unlock the pattern after a TWRP restore?
[email protected] said:
Does not work on lineage OS 15, could not boot the phone anymore. After the initial lenovo splash screen, the phone lit up and dimmed again and again, and finally reboots to fastboot mode.
I know this isn't the place to discuss this issue but - why can't I unlock the pattern after a TWRP restore?
Click to expand...
Click to collapse
Thanks for feedback will try make kernel to work in android O.
Never take backup with security lock
Sent from my Pixel 2 XL using Tapatalk
[email protected] said:
Does not work on lineage OS 15, could not boot the phone anymore. After the initial lenovo splash screen, the phone lit up and dimmed again and again, and finally reboots to fastboot mode.
I know this isn't the place to discuss this issue but - why can't I unlock the pattern after a TWRP restore?
Click to expand...
Click to collapse
I added support for android o ,u wanna try ?
I
Sent from my Pixel 2 XL using Tapatalk
ProPrk said:
I added support for android o ,u wanna try ?
I
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
The way you put your sentence sounds as if you don't expect it to work, as if you're asking me to jump off a cliff. So...yes I will try, in a few hours.
[email protected] said:
The way you put your sentence sounds as if you don't expect it to work, as if you're asking me to jump off a cliff. So...yes I will try, in a few hours.
Click to expand...
Click to collapse
In 20min
[email protected] said:
The way you put your sentence sounds as if you don't expect it to work, as if you're asking me to jump off a cliff. So...yes I will try, in a few hours.
Click to expand...
Click to collapse
W8 dont flash the zip w8 20min will give new link
Sorry for that
Sent from my Pixel 2 XL using Tapatalk
ProPrk said:
W8 dont flash the zip w8 20min will give new link
Sorry for that
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
No problem. I'm glad I haven't downloaded it yet.
Oreo Kernel Test Build
[email protected] said:
No problem. I'm glad I haven't downloaded it yet.
Click to expand...
Click to collapse
[emoji23][emoji23][emoji23]
try this
https://www.androidfilehost.com/?fid=889964283620758897
[email protected] said:
No problem. I'm glad I haven't downloaded it yet.
Click to expand...
Click to collapse
Did you tried?
Sent from my Le 2 using Tapatalk
ProPrk said:
:laugh::laugh::laugh:
try this https://www.androidfilehost.com/?fid=962021903579484607
Click to expand...
Click to collapse
Yes, now it works on Oreo! Thank you very much.
Apart from cpu governors, its hard to notice the performance difference.
[email protected] said:
Yes, now it works on Oreo! Thank you very much.
Apart from cpu governors, its hard to notice the performance difference.
Click to expand...
Click to collapse
Me trying to make this kernel battery efficient without compromising performance
Sent from my Le 2 using Tapatalk
Updated kernel to #v1.1 and now u can use this kernel in Oreo ROMs too
This kernel only works in 64 bit rom

[Nightly][Mokee][MK81.0-clover-201811250036]

After experimental edition, today released nightly edition !!!!!!
https://download.mokeedev.com/?device=clover&type=
shimulx said:
After experimental edition, today released nightly edition !!!!!!
https://download.mokeedev.com/?device=clover&type=
Click to expand...
Click to collapse
Works good, no issues so far.
DT2W is working now but the magnetic cover still not working
thx good work
Camera now has its own app or need third party as before?
Sent from my MI PAD 4 using XDA Labs
Kah_S said:
DT2W is working now but the magnetic cover still not working
Click to expand...
Click to collapse
It's not working at mi pad 4 plus (both devices has same rom)
Since kernel source has been released, all bugs will solve soon....
tim-scrap said:
Works good, no issues so far.
Click to expand...
Click to collapse
What about battery backup?????
shimulx said:
What about battery backup?????
Click to expand...
Click to collapse
Not Sure what exactly you mean, not used device (Pad 4 plus) a lot since Installation., But battery drain etc Looks fine. No Backup of battery done...
tim-scrap said:
Not Sure what exactly you mean, not used device (Pad 4 plus) a lot since Installation., But battery drain etc Looks fine. No Backup of battery done...
Click to expand...
Click to collapse
I mean screen on time.
gyro sensor not working.
auto rotation is not working
Developer is preparing for the postgraduate exam, after this month he will gradually begin to fix various minor problems.
yepyup said:
gyro sensor not working.
auto rotation is not working
Click to expand...
Click to collapse
1126 version fix gyro sensor
but dt2w sometime not working in deep sleep
and sometime disable wi-fi need to reboot
MoKee Open Source Downloads
File not found or illegal request.
For Rom and Gapps
letschky said:
MoKee Open Source Downloads
File not found or illegal request.
For Rom and Gapps
Click to expand...
Click to collapse
mine is working
letschky said:
MoKee Open Source Downloads
File not found or illegal request.
For Rom and Gapps
Click to expand...
Click to collapse
Yes me too.
gaja22 said:
Yes me too.
Click to expand...
Click to collapse
meanwhile it has worked, cool rom.
you have to try it more often
yepyup said:
gyro sensor not working.
auto rotation is not working
Click to expand...
Click to collapse
Auto-rotate will be lost if you wipe the persist partition.
You will need to install official Chinese stable firmware MIUI (zip for recovery through twrp).
Details (instruction from 4pda):
What you need to do if autorotate isn't working:
1) flash twrp in fastboot, reboot in twrp
2) TWRP:
wipe data/cache/system
flash Chinese stable MIUI zip. reboot в system
wait when MIUI loaded, reboot in twrp (maybe you will need to repeat step 1)
3) Wipe data/cache/system
3) Flash Mokee + gapps pico. Reboot in system
4) Profit
eliccs said:
Developer is preparing for the postgraduate exam, after this month he will gradually begin to fix various minor problems.
Click to expand...
Click to collapse
Please add DT2W for Mi Pad 4 Plus Thank you .
tom.android said:
Please add DT2W for Mi Pad 4 Plus Thank you .
Click to expand...
Click to collapse
DT2W is working fine
---------- Post added at 02:38 PM ---------- Previous post was at 02:36 PM ----------
https://m.weibo.cn/detail/4311692730613713
Magnetic cover lock will be fixed in tomorrow's nightly build.

Stable VENDOR-ROM-KERNEL(VRK) combination for Beryllium

we already faced ghost touch,screen freeze,minor bugs and tons of small issues with vendor(beta) & Rom n kernel optimization.So pls suggest Ur choice as per Experience basis.Lets figure out best stable VRK.:fingers-crossed:
Useful Thread, thanks for starting
Extrme kernal is stable we can proceed with that and official twrp for freezing issues. It dosent mean other kernals are bad but personally point of view i prefer
Crdroid nightly 06/19 + vendor 9.6.18 (kernel using atm is included with crdroid which can be see at the attachment)
Karticvrm said:
Extrme kernal is stable we can proceed with that and official twrp for freezing issues. It dosent mean other kernals are bad but personally point of view i prefer
Click to expand...
Click to collapse
TWRP freezing issue cannot be solved easily, use Orangefox Recovery
therealMarcGeneson said:
Crdroid nightly 06/19 + vendor 9.6.18 (kernel using atm is included with crdroid which can be see at the attachment)
Click to expand...
Click to collapse
do u find any bug?
I was on crDroid stable + 9.5.6 vendor [miui beta] + MLX kernel for 2.5 months, now I'm on Reloaded-CAF + 10.3.4.0 vendor [miui stable] + MLX.
For me these have been really great so far. The only reason for the shift is because I was wanted some 'change of scenery' and also weekly updates was kind of a bother to me.
markmywordz said:
TWRP freezing issue cannot be solved easily, use Orangefox Recovery
Click to expand...
Click to collapse
There is a fixed 3.3 version uploaded on Pocophone updates in Telegram. It works really well.
OxygenOS 6T beta 10, smooth performance and amazing battery life.
Only issue I face, Adaptive brightness, can be irritating at times
rakeshb4r said:
OxygenOS 6T beta 10, smooth performance and amazing battery life.
Only issue I face, Adaptive brightness, can be irritating at times
Click to expand...
Click to collapse
vendor?
markmywordz said:
vendor?
Click to expand...
Click to collapse
10.3.4.0 stable
Though might be modded for optimisation
BenParz said:
There is a fixed 3.3 version uploaded on Pocophone updates in Telegram. It works really well.
Click to expand...
Click to collapse
is it unofficial version?
i tried official 3.3 but its stuck for 4-5 secs
markmywordz said:
is it unofficial version?
i tried official 3.3 but its stuck for 4-5 secs
Click to expand...
Click to collapse
It is unofficial but it pretty much is the official one with the freezing problem fixed.
BenParz said:
It is unofficial but it pretty much is the official one with the freezing problem fixed.
Click to expand...
Click to collapse
link pls
markmywordz said:
link pls
Click to expand...
Click to collapse
https://t.me/PocoRomNews/2423
BenParz said:
There is a fixed 3.3 version uploaded on Pocophone updates in Telegram. It works really well.
Click to expand...
Click to collapse
Is there a delay of unresponsiveness when booting into recovery? Like 10 seconds of no response from previous builds?
Edit: Forget it, I continued reading way too late to get my answer.
Nyuubi said:
I was on crDroid stable + 9.5.6 vendor [miui beta] + MLX kernel for 2.5 months, now I'm on Reloaded-CAF + 10.3.4.0 vendor [miui stable] + MLX.
For me these have been really great so far. The only reason for the shift is because I was wanted some 'change of scenery' and also weekly updates was kind of a bother to me.
Click to expand...
Click to collapse
Could you please post the download link of 10.3.4.0 vendor zip. I couldn't find it on akhilnarang's repo. Thanks!
ayush2901 said:
Could you please post the download link of 10.3.4.0 vendor zip. I couldn't find it on akhilnarang's repo. Thanks!
Click to expand...
Click to collapse
Sorry, my bad, it's actually 10.3.5.0
markmywordz said:
is it unofficial version?
i tried official 3.3 but its stuck for 4-5 secs
Click to expand...
Click to collapse
Yes its the unofficially one, but all fine with this one
2WildFirE said:
Yes its the unofficially one, but all fine with this one
Click to expand...
Click to collapse
though it did not support encryption/decryption....everytime u hav to flash DFE zip....

[KERNEL] [ R-S ] [4.14.212] -- azure - Discombobulated -- [22 February, 2022] [AOSP]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
One of the Finest and Oldest Kernel for Redmi Note 7 Pro. Stability alongwith ultra-smooth performance for daily tasks and performance - battery friendly Kernel for everyone to enjoy.
Built with Azure Clang 15 + Link Time Optimization for maximum performance + efficiency for your lovely device.
Each releases experiences a rigorous testing to avoid any regressions.
Click to expand...
Click to collapse
Release Information ( Features + Wiki + Compatibility )
Everything related to the bracketed topics can be found at Github.
Features + Changelogs - https://github.com/Panchajanya1999/msm-4.14/releases/tag/Fourteenth
Q isn't supported at XDA anymore. It's all about R and S
Click to expand...
Click to collapse
Download
Download the build from the link shared below
NOTE: Build Date may be 1 day old (Tested Builds)
Direct Download Link
Click to expand...
Click to collapse
Telegram References
Telegram Group - https://t.me/azure_violet
Telegram Channel - https://t.me/azure_ci
Click to expand...
Click to collapse
Meta
- Toolchain: Azure Clang 15 (subject to updates)
- Toolchain (companion): GCC 11.2
- Main branch: R
Click to expand...
Click to collapse
Donations
I do not get paid for anything I do. Yet, not a single thing is free in this world. I build on top-tier servers, which aren't free. So, if u like my work, consider buying me a Coffee / Soft-drinks !
UPI : [email protected] | [email protected]
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Everyone who authored the commits
* Whole Testing Group Buddies
XDA:DevDB Information
azure Kernel, Kernel for the Xiaomi Redmi Note 7 Pro
Contributors
Panchajanya1999
Source Code: https://github.com/Panchajanya1999/msm-4.14.git
Kernel Special Features: Stable and Latest Kernel with useful features
Version Information
Status: Stable
Current Stable Version: Twelfth
Stable Release Date: 2022-02-22
Created 2019-07-02
Last Updated 2022-02-22
Steps For Flashing On Stock AOSP Recovery
ADB Sideload works totally fine. If you are rooted, use Franco Kernel Manager.
Reserved
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
RVSingh said:
I was just thinking to request for a custom kernel..Thankyou man!
Gonna flash rn
Click to expand...
Click to collapse
Go Ahead
Panchajanya1999 said:
Go Ahead
Click to expand...
Click to collapse
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
RVSingh said:
Using bootlegers rom .After flashing at first phone got stuck at boot animation but then i rebooted into recovery by pressing keys and then to system.Now its Working fine.Will Post If a face any problem.
Thankyou for your work bro
Click to expand...
Click to collapse
Which Recovery????
Sent from my Redmi Note 7 Pro using Tapatalk
Panchajanya1999 said:
Which Recovery????
Click to expand...
Click to collapse
Peter's
Anybody tested this on MIUI?
Naveenthemi said:
Anybody tested this on MIUI?
Click to expand...
Click to collapse
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Panchajanya1999 said:
Won't boot on MIUI.
Either stick with stock kernel or flash custom ROMs
Click to expand...
Click to collapse
Ugh..thanks anyways..
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
justboryata said:
I have to ask, when I install a new rom (clean install) do I need to boot first or I can just flash it before magisk and after GAPPS?
Click to expand...
Click to collapse
Boot first
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Can I flash over OOS gsi? Which recovery is recommended?
mj25m said:
Can I flash over OOS gsi? Which recovery is recommended?
Click to expand...
Click to collapse
You can
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
Bro any chance you could make one for miui....Appreciate your work...Thnaks
24likan said:
Bro any chance you could make one for miui....Appreciate your work...Thnaks
Click to expand...
Click to collapse
Till xiaomi updates source, I can't
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
It is a common problem , try F1xy kernel until this is fixed , we had created a work around on F1xy , because i had already reported this problem like one month ago.
justboryata said:
I have problem when phone goes lower than 10%, it becomes unusable and laggy, please help.
Click to expand...
Click to collapse
Yea,
This is an issue right now,
Will be fixed in next update tho.
There will be a new thing on next update tho. I m working on it...!!!
Sent from my Xiaomi Redmi Note 7 Pro using XDA Labs

Categories

Resources