проблема при блокировки загрузчика - Xperia Z5 Q&A, Help & Troubleshooting

Я разблокировал загрузчик чтобы сделать прошивку телефона sony xperia z5 compact и поставить новую версию android 7.1.1 прошил телефон сначала поставил прошивку Australia Costumization по работал телефон две недели но не очень понравилось как работает и мимо этого с видеокамерой появилось проблема и в картинке видео искателя и когда снимал видео сильно тормозила .Как раз уже появилось прошивка для европейских стран Central Europe 1 поставил эту прошивку телефон работал нормально но с видеокамерой проблема не решалась Но каждый раз когда я прошивал телефон разблокировал загрузчик и блокировал обратно и я по думал что проблема в софте и опять прошил телефон до android 6.0.1 но не сразу заблокировал загрузчик и проверил видеокамеру и заработала камера снимала без тормозов и как только заблокировал загрузчик видеокамера снова тормозит.Что делать можно оставлять загрузчик разблокированным ?и что делать с видеокамерой как восстановить её при заблокированным загрузчике?
mod edit - Google translate added according to Forum rules
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature).
Click to expand...
Click to collapse
I unlocked the bootloader to make the firmware of the phone sony xperia z5 compact and to install the new version of android 7.1.1 I stashed the phone first set the firmware of Australia Costumization for worked phone for two weeks but did not really like how it works and past this with a video camera there was a problem both in the video of the searcher and when I shot the video was very slow. Once it appeared the firmware for European countries Central Europe 1 put this firmware on the phone worked fine but with the video camera the problem did not dare But every time I stitched the phone unlocked the loader and blocked back and I thought that the problem was in the software and again I flashed the phone to android 6.0.1 but did not immediately lock the boot loader and checked the camcorder and the camera shot without any brakes and as soon as the bootloader blocked the camcorder again brakes. What can I do to leave the bootloader unlocked ? and what to do with the video camera how to restore it when the boot loader is locked?

bootloader problem
I unlocked the bootloader to make the firmware of the phone sony xperia z5 compact and to install the new version of android 7.1.1 I stashed the phone first set the firmware of Australia Costumization for worked phone for two weeks but did not really like how it works and past this with a video camera there was a problem both in the video of the searcher and when I shot the video was very slow. Once it appeared the firmware for European countries Central Europe 1 put this firmware on the phone worked fine but with the video camera the problem did not dare But every time I stitched the phone unlocked the loader and blocked back and I thought that the problem was in the software and again I flashed the phone to android 6.0.1 but did not immediately lock the boot loader and checked the camcorder and the camera shot without any brakes and as soon as the bootloader blocked the camcorder again brakes. What can I do to leave the bootloader unlocked ? and what to do with the video camera how to restore it when the boot loader is locked?

livik90 said:
I unlocked the bootloader to make the firmware of the phone sony xperia z5 compact and to install the new version of android 7.1.1 I stashed the phone first set the firmware of Australia Costumization for worked phone for two weeks but did not really like how it works and past this with a video camera there was a problem both in the video of the searcher and when I shot the video was very slow. Once it appeared the firmware for European countries Central Europe 1 put this firmware on the phone worked fine but with the video camera the problem did not dare But every time I stitched the phone unlocked the loader and blocked back and I thought that the problem was in the software and again I flashed the phone to android 6.0.1 but did not immediately lock the boot loader and checked the camcorder and the camera shot without any brakes and as soon as the bootloader blocked the camcorder again brakes. What can I do to leave the bootloader unlocked ? and what to do with the video camera how to restore it when the boot loader is locked?
Click to expand...
Click to collapse
2 things:
if you haven't done a backup of your TA partition (DRM keys), they're gone,
you can flash a custom kernel with drm key emulation, however, that should give you the same camera / video quality like before.
Once the bootloader is unlocked it should stay unlocked,
not sure I understand why it's supposedly locking up again - or are you locking the bootloader again ?
Why would you want to do that after each flash of a ROM (?).
Can you explain the "camcorder" / video recording, camera taking issue a bit more ?

Related

Error 206: Device data error-Please HELP!!!

When MaUpradeUt sends device to bootloader-it gives ERROR 201-GET DEVICE DATA ERROR
Jam remaines in bootloader
Hard Reset helps not
Soft Reset too
I see only bootloader screen
Update from SD not working
HELP PLEASE
I've tried MTTY-s2d and d2s not working
Backup on SD from another JAM not working too
HELP PLEASE
sorry for terrible English
MTTY-s2d and d2s not working
"d2s 0" to dump boot loader (required for language change)
Pozvoni mne +70957825572
ili [email protected].
Can i do it without solder?
it is on warranty :shock:
spaceball said:
Can i do it without solder?
it is on warranty :shock:
Click to expand...
Click to collapse
I did not find possibilities to fix it without solder. Tried with Webpanel.ru and portalux.ru. Thanks to tupisdin - now my device is working again
Almost the same in russian:
Я не нашла возможности починить аппарат без паяльника. Пробовала и сама (предварительно перечитав весь это форум), и отдавала в webpanel.ru и portalux.ru
Единственный, кто реально смог помочь - это как раз tupisdin . Хотя, как я поняла, у него тоже не с полпинка получилось. Но ваш девайс проще будет - на моем уже процедуру отработали.
Гарантия - ну да, теперь гарантии никакой . Но что лучше - неработающий аппарат с полуживой гарантией (потому что он был перепрошит "чужой" прошивкой, собственно поэтому и подох), или полностью работоспособный без гарантии ?
Is your device working good?
Как девайс пашет?
tupisdin said:
Is your device working good?
Как девайс пашет?
Click to expand...
Click to collapse
As far - no problems! Thank you.
:roll:
can u explain me , how to make the device working again?

Can't update the firmware

Mod Translation
Hello, need help updating the firmware, don't know how to update it have instructions
Original
Здравствуйте, нужна помощь с обновлением прошивки ,не знаю как ее обновить есть инструкция
Without knowing the brand & model of your phone you can't get helped. Should be obvious, shouldn't it?

Question, bootlup after C20 firmware

Всем привет, господа, вам нужна ваша профессиональная помощь.
Появилась прошивка C16 Global, прибыл OTA C20. Рут была установлена.
Я решил обновиться. Он удалил его, Magis полностью, загрузил в систему, уже без root. Забыли о сохранении Boot. Но Full нашел прошивку из Индии C20, распаковал из нее багажник, проткнул магиск, вшил его в систему сразу, телефон загрузился, установил ,agisk, все работает, колея действительна, но примерно через 20 минут приложения перестали запускаться, телефон перезагрузился и началась загрузка. Безопасный режим не загружается... К сожалению, у меня нет стоковой кнопки от C20, я пытался блеснуть прикладом от C20 India и Europe, это не помогает, как и загрузка. Я не хочу терять данные. Я попробовал прошить полные образы прошивки C20 India и C20 Europe, это не помогло, как и загрузка. (для прошивки я использовал программу FASTBOOTENHANCE). Я попытался переключить слот на a и b, а также результат 0. Третий день я не могу восстановить нагрузку. Я не хочу терять важные данные по телефону.
Может быть, кто-то может скинуть и без того жалкий ботинок от C20 Global и стоковый ботинок от C20 Global. Или какие-то другие советы.
Буду очень признателен за помощь
lenox30 said:
Hello everyone, gentlemen, you need your professional help.
There was a firmware C16 Global, an OTA C20 has arrived. Ruth was installed.
I decided to upgrade. He deleted it, Magis completely, loaded into the system, already without root. Forgot about save Boot. But Full found the firmware from India C20, unpacked the boot out of it, pierced the magisk, sewed it into the system right away, the phone loaded, installed the ,agisk, everything works, the rut is valid, but after about 20 minutes the applications stopped starting, the phone rebooted and the bootlup. The safe mode does not load ... Unfortunately, I don’t have a stock button from C20, I tried to flash the stock butt from C20 India and Europe, it does not help, as well as a bootup. I don't want to lose data. I tried to flash the Full images of firmware C20 India and C20 Europe, it does not help, as well as a boot. (for the firmware I used the FASTBOOTENHANCE program). I tried to switch the slot to a and b, as well as the result 0. The third day I can not restore the load. I do not want to lose important data on the phone.
Maybe someone can throw off the already pathetic boot from C20 Global and the stock boot from C20 Global. Or some other tips.
I would be very grateful for help
Click to expand...
Click to collapse
Given all the things you've tried, I think your best option is to use the MSM Tool.
You won't be able to recover any data unless you can get your phone to boot back into C20.
@lenox30, please rename this thread to something more appropriate. I didn't know what to call it when I moved it from the other thread.

Redmi 9a deep brick

Hello everybody.
Tried to mod my phone as a result - brick. I tried to mod trwp and got bootloop. Then, with Flashtool, tried to recover with official firmware. Now my phone doesent even start - I press and hold power button, phone is making long vibro and this is it.
Tried to fix it with another official firmware and Flashtool, process stuck at "Downloading DA", then show me an error and finish process.
Please help to recover it.
Sorry for bad English
search, there was similar problem here and only specific ROM worked to get it to work again.
if that doesn't help search for edl or someone with box to get it back to normal state
AriShootingStar said:
Всем привет.
Пытался модифицировать свой телефон в результате - кирпич. Я попытался модифицировать trwp и получил бутлуп. Потом с помощью Flashtool пробовал восстановить официальной прошивкой. Теперь мой телефон даже не запускается - я нажимаю и держу кнопку питания, телефон издает долгую вибро и все.
Пытался исправить с помощью другой официальной прошивки и Flashtool, процесс застрял на "Загрузка DA", затем покажите мне ошибку и завершите процесс.
Пожалуйста, помогите восстановить его.
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator
erase the video completely :
if your phone is from china, you can put the chinese firmware try this one to download and put
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
it helped me with this status ext ram error
don't try to flash the global firmware.
****************************
сотрите видео полностью :
если у вас телефон из китая, то можно поставить китайскую прошивку попробуйте эту скачать и поставить
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
мне помогло вот такая была у меня ошибка status ext ram exception
не пробуйте шить глобальную прошивку не получится
pro20001lsx said:
мне помогло вот такая была у меня ошибка status ext ram exception
не пробуйте шить глобальную прошивку не получится
Click to expand...
Click to collapse
speak in normal language, {Mod edit}
{Mod edit: Content violating rule no. 2 removed}
yaro666 said:
speak in normal language, ...
Click to expand...
Click to collapse
sorry open the translator copy my text and paste it into the translator
I'm just from Russia and it's not convenient for me to write in English
pro20001lsx said:
sorry open the translator copy my text and paste it into the translator
I'm just from Russia and it's not convenient for me to write in English
Click to expand...
Click to collapse
ok, hope you don't support war crimes done by Vladimir P.
yaro666 said:
ok, hope you don't support war crimes done by Vladimir P.
Click to expand...
Click to collapse
I will not tell you this is personal))

samsung s10e разблокировка ( unlocking samsung s10e )

Добрый день.
Подскажите у меня samsung S10E на нем была прошивка Андроид 9 и телефон работал без проблем. Но после обновления до Андройд 12 ( SM-G970U_TMB_G970USQS6GUI1_fac) у смартфона заблокировалась сим карта ( то есть сеть телефон видит , а звонить я не могу ).
подскажите кто знает как разблокировать данную модель под другого оператора.
Данный телефон был приобретен на eBAY. Я связывался с американским оператором T-Mobail , но их ответ ищите первого владельца , что на данный момент не возможно. жду от вас помощи по разблокировки смартфона samsung S10E. Спасибо заранее.
Good afternoon.
Tell me I have a samsung S10E with Android 9 firmware on it and the phone worked without problems. But after upgrading to Android 12 (SM-G970U_TMB_G970USQS6GUI1_fac), the smartphone's SIM card was blocked (that is, the phone sees the network, but I can't call).
tell me who knows how to unlock this model for another operator.
This phone was purchased on eBay. I contacted the American operator T-Mobile, but their response is to look for the first owner, which is not possible at the moment. I am waiting for your help to unlock the samsung S10E smartphone. Thank you in advance.
Hello and welcome to XDA. Thank you for including an English translation with your post, we greatly appreciate it. I would like to make a small recommendation - Please provide some sort of break (space, line, something) between Russian and English as it helps make it easier to read.
https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572

Categories

Resources