Related
Hello, I have a problem with my nexus s, it gets stuck on the Google logo, I can not
more access to recovery but I access the boot loader!
I can make adb command, but really impossible to access the recovery or flashing
another recovery or image!
i try to lock and unlock the boot loader to reset but no effect!
I were under 22 nightly and i wanted to restart in recovery when it s happened!
SOMEBODY have a solution or sav?
sorry for my pour english!
just suggestion try to reflash recovery wiht another computer which using windows XP
Go into bootloader.....reflash recovery typing
fastboot flash recovery recovery.img (assuming your recovery is just named recovery.img) then download a nandorid backup any is fine, if you have one fine and then restore it in new recovery.
BUT WRONG THREAD BUDDY
Impossible to flash a new recovery via adb not working ,xp and seven !
phone go to sav !
thanks to you for your help
lolog4 said:
Impossible to flash a new recovery via adb not working ,xp and seven !
phone go to sav !
thanks to you for your help
Click to expand...
Click to collapse
if u can enter download mode, u can search for odin in the android dev forums.
Can anyone update the build.prop of the pulid f17?
I edited it and my device wont boot now
Ps: I dont have the backup of build.prop and i cant install anything from recovery or adb, it just says Installation aborted
Help me please!!
Maybe you can download full rom from here...
http://www.needrom.com/mobile/pulid-f17s5/
I tried to install it from flashtool but it wont detect my device.. i can't boot it in download mode
up!!
I tried to wipe from adb, but now my phone won't boot into factory mode. It can boot into recovery mode but i can't write adb shell in the recovery mode...
i couldn't even find the fast boot
can you help me with unlocking fastboot of oppo f17
erchabolas said:
Can anyone update the build.prop of the pulid f17?
I edited it and my device wont boot now
Ps: I dont have the backup of build.prop and i cant install anything from recovery or adb, it just says Installation aborted
Help me please!!
Click to expand...
Click to collapse
Please how where you able to root your oppo f17
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
I had a custom 5.1.1 carbon rom with a twrp recovery and well I wanted 6.0 + nethunter I have been trying to install cyogen or acip rom with no luck just hangs on NVidia log , I stupidly flashed recovery img fro cryogen and no cant boot in to recovery no more , if I open fast boot I get my tablet listed in fastboot devices and nothink in adb devices if I try to flash recovery back to twrp using
fastboot flash recovery twrp.zip it just does nothink no errors just sits there I don't know what to try so asking for some help , I'm using my laptop and work pc with no difference
hope some one can help thanks
craig
ok I sumhow reinstalled twrp , but when I install croyogen rom just hangs on NVidia logo what can i do ? update anythink like bootloader? , new twrp seems not to load or cwm recovery wont load eather
Craigst1 said:
ok I sumhow reinstalled twrp , but when I install croyogen rom just hangs on NVidia logo what can i do ? update anythink like bootloader? , new twrp seems not to load or cwm recovery wont load eather
Click to expand...
Click to collapse
Flash stock, reboot, than twrp+custom rom.
https://developer.nvidia.com/shield-open-source
1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment CWM_CUN-l03-l21.img recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
FOR L21 USERS: THIS ONLY WORKS FROM B103 UPDATE YOU CAN TRY WITH THIS(sdcard method) or THIS(not tested)
CREDITS: CELULARSERVICE.UY
Awesome man
hernankano said:
1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment 3999777 recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
CREDITS: CELULARSERVICE.UY
Click to expand...
Click to collapse
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Sparkrite said:
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Click to expand...
Click to collapse
Thank you, I'm glad that it worked for you.
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
hollarp said:
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
Click to expand...
Click to collapse
You can backup your apps by using any of the apps available from play store, however without root these probably won't backup the apps data.
No need to backup system as this won't be affected by unlocking bootloader. The recovery partition will of course be overwritten when you flash TWRP.
Remember unlocking bootloader does factory reset the phone.
y5 cun-l21
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
t214 said:
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
Click to expand...
Click to collapse
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Sparkrite said:
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Click to expand...
Click to collapse
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
t214 said:
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
Click to expand...
Click to collapse
Don't know why its not working but here is a link to two genuine stock ROMS for the y5II.
http://consumer.huawei.com/lk/mobile-phones/support/downloads/huawei-y5ii_lk.htm
If you dont want to try flashing the whole rom then download "HuaweiUpdateExtractor" tool and extract just
the recovery partition from either of the roms and flash just that recovery.
Let me know how you get on.......
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
t214 said:
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
Click to expand...
Click to collapse
Which stock recovery did you flash and did you use the Huawei Extract tool to extract it, if so what size was it exactly?
i was trying to flash both with cun-l22 recovery using update.app
Excelent!!!!
Working on CUN-L23. Thanks!!!
t214 said:
i was trying to flash both with cun-l22 recovery using update.app
Click to expand...
Click to collapse
OK, you are not giving me much information as to EXACTLY what you are doing, like what commands you are using and the responses you are getting and so are making it very difficult for me to help you.
Do you have a working recovery or not ?
BTW you cannot flash the Update.app from recovery, I suggest you do some research on how to use Dload.
I have attached a small PDF to get you going.
Huawei Update extractor tool is very handy though.
custom recoveries from this topic dont work for me
my stock recovery (cun-l21) dont work(cant get it anywhere)
flashed recovery from cun-l22 works but from cun-l29 its not working
now i only have cun-l22 recovery working on my phone
trying to flash stock rom (CUN-U29, C567B128, Sri Lanka) using cun-l22 recovery it shows: "verify: uboot partition unallowed chang, old_address=1c80000, new_address=712000 error: partition verify is failed Update /sdcard/dload/update.app failed"
trying to flash stock rom (CUN-L22, C567B128, Sri Lanka) using cun-l22 recovery and it shows: "main version from property is cun-l21c79b104-1 the cur_num:1 update_num:1 version check failed error: current version is not in verlis, unallow to update Update /sdcard/dload/update.app failed"
i was trying to flash using recovery/vol up +vol down+power/in system option using update
Can I use this recovery on cun u-29
Same problem here as t214. I have the CUN-L21. Flashed twrp , didn't work , flashed back the L22 stock recovery , that doesn't work for me also so now i don't have any recovery. Does anybody have a solution for this ?
---
L.E. : managed to make the stock CUN-L22 recovery work , but still cannot flash TWRP or CWM , both cause 1-2 reboots and then normal booting , then i have to revert to stock again.
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
HellBlaZer69 said:
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
Click to expand...
Click to collapse
Hello. Do what sparkrite said on the first page. Download the full rom from that Huawei website (the cun-l22 one , but it works). Download huawei update extractor and load in it the update.app. inside you will see recovery.img. Right click and extract. Flash that. Worked for me , i have stock l22 recovery , i don't know if it will be a problem on the long run but i can't find it for l21 anywhere.